• classification:150mm /6"
• Material:Chromium-vanadium alloy steel

● Versatile curved jaw features integral wire cutter

● Nickel-plated finish resists rust and corrosion

● Angled tooth pattern for better grip

● Made of chrome molybdenum alloy steel for exceptional strength and durability

7"/175mm Straight Jaw Locking Pliers wo /cutting Edge

• High quality steel
• Wire cutter with crimping function
• Non slip handle

• The hammer head is attached with 2 wedges for better durability
• Ball end use for riveting and poll used for normal striking
• Meets ANSI standards
• Handle 25% longer in 16 - 302oz sizes for better balance and control
• Head length: 355mm (14")
• Weight: 450gm (16oz)

• CRIMPING PLIERS 9 inches 230MM 84-223
• Cuts electrical wires, strips insulation, shears screws and bolts clean

• - Side wire cutter for copper and hard steel wires (max. 160 Kg / mm²).
• - 185: straight beaks.
• - 195: elbows 40 °.
• - PVC sheaths.
• - Presentation: polished, varnished.

Facom 197G.18 90°-Tip Expansion Pliers

DIN 5254, NF E 73-130, ASME B 107.19.

• For inside circlips

Shipping Weight: 190g 

Fiberglass Handle

Precision-machined solid brass head
Mirror-Polished head
Fiberglass handles for extra durability
Non-slip comfort rubber handle design

Used to strike materials that must not be damaged
Used as a general-purpose soft-faced hammer in automotive, general engineering for assembly, repair & maintenance

• Fiberglass shaft with polypropylene outer jacket
• Tape lock union between head and shaft for safety
• Flock-filled rubber grip impervious to heat
• Meets ANSI standards
• Improved handle design for greater comfort & control
• Head length: 335mm (13 1/4")
• Weight: 450gm (16oz)

• 69-799 body is nickel-plated
• Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
• Spring loaded handle ejects rivets stem
• All steel body with non-slip grip-wrench for changing nosepieces
• Contents: Heavy duty riverter c/w 4 nosepieces for 3/32", 1/8", 5/32", 3/16" rivets
• Pin head: Flat

• Shaft 15% longer for better balance & control in usage
• Grip 15% longer for better performance
• Individually heat-treated for long life
• Hardened and tempered tubular steel shaft for strength
• Flock-filled rubber grip for comfort and durability
• Meets ANSI standards
• Head Length: 335mm (13 1/4")
• Weight: 450gm (16oz)

• Hard nylon faced hammer with two screw-on all purpose striking faces for light and heavy duty applications. Chrome plated head with a fully moulded polypropylene shaft with soft feel dual material grip. Overall length: 305mm

• Face Diameter	38 mm
  Overall Weight	0.62

• The newly designed tip can grip even low head screws (truss screws).
• By adjusting the angle at which the pliers clamp down on the screws,

   screws can be held even more firmly.
• The added blade allows the Neji-saurus GT PZ-58 to be used as pliers.
• The new elastomer grip is friendly on your hands and the environment.

• -  HI-LOW adjustable pressure (Hi: 15±2kg, Low: 10±2kg)
• -  110/88,66 with cut function
• -  Storage chamber
• 
   
• -  The nonslip handle provides easy operation and user comfort.
• -  Integral blade storage chamber on the end of the handle for a spare blade, more convenient.
• -  Increased HI/LOW impact forces to meet demands of all category cables through Cat 6.
• -  Materials: Housing: ABS, Blade: 40Cr
• -  OAL:146mm

• Proskit 608-369A, Wire Stripping Tool For 0.5, 1.2,1.6,2.0mm.

• OAL: 170 mm
• Application Strip wire size: 1.0, 1.6, 2.0, 2.6, 3.2 mm

• Tool for stripping solid wires AWG 12 (2 mm), AWG 10 (2.6 mm), AWG 8 (3.3 mm), AWG 14 (1.6 mm), AWG 18 (1 mm), AWG 22 (0.6 mm).

• Heavy Duty Wire Strippers/ Crimpers

• Combination impact and torque tool function. Both side (screwdriver & wire-pull function)

• The cutting edge is made from tungsten steel, with a hardness of HRC 78˚±3˚ to provide high durability, long service life and anti-rust.
• High leverage powerful diagonal cutter
• Serrated jaw provides a firm grip
• High quality PVC handle will not easily comes off
• Cutting capacity: piano wire ø2.5mm(.10”) under HRC 50°
• OAL: 225mm

• New mechanical design, up to 50% cutting force saving than regular pliers
• Induction-hardened cutting edge stay sharp for a long service life, hardness approx. HRC56°~62° 
• Hot-riveted joint ensures smooth action and no handle wobble
• Made from Cr-V steel with nickel plating for corrosion resistant
• Ergonomically shaped non-slip TPR handle for user comfort

• Application: Copper 1.3 mm
• Pro'sKit 1PK-396A – cutting plier.
• Application: Copper 1.3 mm.
• OAL: 110 mm.

• Bi-material handle for anti-slip & comfort
• Serrated jaws made of chrome molybdenum material
• Heat treated adjustable screw
• Long straight nose provides easy access in narrow, hard to reach places
• Ideal for precision work
• Curved jaws puts tremendous pressure onfour points at any style or bolt head
• Straight jaws provides maximum contact on flat, square & hex work - ideal for welding & other metal work

• Good quality adjustable wrench that can be locked into position.
• Chrome Vanadium Steel construction

Size: 5”
Capacity: 12-25mm
Chrome Vanadium Steel Material
Spring-Assisted Opening For Inside Circlip
Comfort Non-Slip Grip Handle

• The Hammer head is attached with 2 wedges for better durability
• Natural hardwood handle
• Meets ANSI tandards
• Hammer claws 15% longer for greater ease in pulling nails
• Head length: 330mm (13")
• Weight: 450gm (16oz)