• Only 66mm (2-5/8") in head height.
• DA3010F : Features a built-in LED job light.
• With keyed chuck.

• Input Power: 720w
• Rated Speed: 12000/min
• Disc Size: 100mm
• Disc Bore: 16mm
• Spindle Thread: M10
• Cable: 3.0M
• Machine Weight: 1.5kg

• Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience
• Unique anti-vibration spring is postitioned between tool body and rear handle for reduced operator fatigue
• Accepts same shank demolition bits as spline shank rotary hammers
• One-touch tool retainer action for easy accessory installation and removal
• Carbon brushes last for approximately 150 hours
• Factory grease packed for reduced maintenance

• .2.8 Joules of impact energy provides fast drilling and powerful chipping
• .800W motor provides high performance and overload protection
• .Reverse feature assists in the removal of fasteners
• .Variable speed allows for precise hole placement on work surface
• .Factory-set clutch reduces sudden, high torque reactions if bit jams
• .360° side handle adjusts easily for preference or use in tight spaces

• 2.6 Joules of impact energy for fast drilling and chipping speed
• 8.0 Amp high performance motor
• Rotating brush ring delivers full speed/torque in forward and reverse
• Integral clutch reduces sudden, high torque reactions if bit jams

• Ergonomically designed handle with rubberized grip and comfort
• Chuck capacity: 1.5-10mm (1/6" - 3/8")
• In-line design brings drilling pressure in line with center of drill bit axis.
• All ball bearing construction ensures high durability.

• New Aesthetic Design, featuring non-slip elastomer covering on main handle for a sure and comfortable grip. 
• Full 360 degree rotatable. 
• D-handle with 24 positive stops for multi-position operation. 
• Keyed chuck. 
• Variable speed control. 
• Forward/reverse rotation. 
• Double Insulation.

• Keyless Chuck
• Ergonomically designed handle with rubberized grip and comfort
• In-line design brings drilling pressure in line with center of drill bit axis.
• All ball bearing construction ensures high durability.

• Variable speed (0 - 550 rpm) for versatility.
• Weights only 2.4kg for easy handling.
• Rugged industrial chuck.

• Variable speed by trigger
• Reversible by level switch
• Power input 550W
• Cylindrical housing for durability
• Lightweight 1.4kg
• Specifications
• Drill Chuck    1.5 - 13mm (Key Chuck)
• Capacity    Concrete: 13mm
• Steel: 13mm
• Wood: 20mm
• Power Input      550W
• No Load Speed    2900/min
• Full Load Speed    2900/min
• Full Load Impact Rate      46400/min
• Overall Length    270mm
• Weight    1.4kg

• Ergonomically designed handle with rubberized soft grip
• Sturdy cylinder-shaped motor housing.
• Built-in, shock-proof, high-output
• Ball bearing construction for longer tool life
• Rubberized comfort grip for more comfort, control and reduced operator fatigue

• Extra-low vibration level for reduced operator fatigue.
• Dual purpose for "Rotation Only" and "Rotation with hammering".
• Built-in torque limiter stops bit rotation when hitting reinforcements.
• Industrial strength keyed chuck

• Externally accessible  carbon brush.
• No harm to the wrist when a screw is seated.
• Enables to drive screws even without pre-drilling pilot holes.
• TD010F : LED job light for operation in dark job sites.

• D-Handle rotates 360degrees for multi-position operation.
• Heavy-duty industrial chuck.

• Highest in class efficiency in both drilling and chipping.
• Compact L-shaped motor housing.
• One-touch sliding chuck enables easy bit changes.
• Ergonomically designed handle with rubberized soft grip provides more control and comfort.

• Powerful, compact, ergonomic design with padded grip and side handle for increased operator comfort
• Recessed Lock-on button for continuous use "No Hammering When Idling" function ensures extra-low vibration under no load
• Powerful, compact, ergonomic design with padded grip and side handle for increased operator comfort
• Extended service life of carbon brushes
• One-touch sliding chuck allows for quick and easy bit changes
• 3 modes function, drilling, percussion, drilling and percussion

• Have been designed for drilling in wood, metal and concrete
• This tool is intended for consumer use only

• Ergonomically Shaped for easy one hand operation
• 550W Powerful motor suitable for aluminium tapping and hard wood drilling
• Long durable dust-proof ball bearing and sipport bearing system contribute longer durability
• Forward/reverse control variable speed dial offers convenient and accurate speed and torque settings for specified application.

• - 550W powerful motor for good performance.
• - Variable speed offers more control and is essential for driving screws.
• - Soft grip (More comfortable and ease of control).
• - Secondary handle to provide additional control.

• POWER: 720 W
• CHUCK SIZE :22 MM
• MODE :3
• NO. LOAD SPEED :0-980 RPM
• BLOW/MIN :0-5,200 BPM
• LOCK-ON SWITCH :YES
• VARIABLE SPEED :NO

• Powerful motor for all job-site chipping & chiseling applications
• Class leading durability, egonomics & performance
• Free 5 pc of Stanley Chisel

• 2 Finger switch for long duration fatigue free usage
• 2 modes: Hammer drilling and chiseling
• Carbon brush access caps for easy access and quick change
• Heavy duty type kit box for safe storage under job-site conditions
• L-Shape design provides compact and slim line tool to maximise control
• Safety clutch eliminates sudden high-torque reaction should the bit jam
• Side handle for easy 2 hand operation
• Textured handle grip for long duration easy usage
• With 4.1J of impact energy specially designed to deliver ultimate drilling and chipping power

SPECIFICATION:-

• VOLTAGE : 12V
• NO LOAD SPEED: 
• GEAR 1 : 0-350/MIN
• GEAR 2 : 0-1300/MIN
• CHICK CAPACITY: 10MM
• MAX.TORQUE IN DRILL MODE: 14/24N-m
• TORQUE SETTING: 16 INCLUDING DRILL MODE
• DRILL CAPACITY;
• IN WOOD: 20MM
• IN STEEL : 10MM
• BATTERY: 1.3AH
• WEIGHT: 1.0KG

• Compact and lightweight: most convenient tool in its class for fatigue-free working
• Variable 2-speed design covers wide range of drilling, fastening applications
• Powershare 12V battery is interchangeable with other WORX 12V tools
• LED light increase visibility-great for dark or enclosed area
• Warranty: 12 Months 

• Model : WU340D
• Input power :800w
• No-load speed : 0-1300/min
• Impact rate : 0-5000bpm
• Impact energy : 3.0J
• Drilling capacity wood : 32mm
• Masonry : 26mm
• Steel : 13mm
• Machine weight : 2.9kg

• Most compact design rotary hammer in its class
• 3 in 1 : Drill, driver and rotary hammer
• Powerful pneumatic hammering system delivers high impact energy for concrete drilling
• Compatible with SDS-Plus, round and hex shank bits
• LED light great for dark areas and low battery charge indicator
• 20V MAX Lithium-ion Powershare battery technology is interchangeable with other 20V WORX tools

• 13mm keyless chuck for flexibility and convenience 
• 112pcs household tool set decorating impact drill Kit 
• Variable speed provides greater control on a variety of materials 
• Adjustable side handle and depth stop for enhanced comfort on repetitive tasks 
• Forward and reverse bit rotation for greater control 
• Lock-on switch for continuous running 
• metal too box