Fluke 303 Compact AC Clamp Meters 

• 600 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Resistance range of 40 kΩ
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

• · 999.0 A ac current measurement
• · Cat IV 300V / CAT III 600V safety rated
• · 30 mm jaw size for numerous applications
• · Resistance range of 40 kΩ
• · Slim, ergonomic design is easy to carry and simple to use
• · Easy to read backlight display

• · Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution
• · Small body and jaws fit perfectly in your hand and into tight places
• · Large, backlit display is easy-to-see in less than ideal conditions
• · In-rush current function (319) for measuring starting current for motors, lighting, etc.
• · Measuring current Frequency (319)
• · Resolution up to 0.01A and 0.1 V
• · Measures AC/DC current to 1000 A (319)
• · Measures AC/DC volts to 600 V
• · Resistance measurement to 4000 Ω
• · Continuity for quick checking of shorts
• · Auto-shut-off maximizes battery life so the meter works when you need it
• · Display hold function
• · One year warranty

•  Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution
• · Small body and jaws fit perfectly in your hand and into tight places
• · Large, backlit display is easy-to-see in less than ideal conditions
• · In-rush current function (319) for measuring starting current for motors, lighting, etc.
• · Measuring current Frequency (319)
• · Resolution up to 0.01A and 0.1 V
• · Measures AC/DC current to 1000 A (319)
• · Measures AC/DC volts to 600 V
• · Resistance measurement to 4000 Ω
• · Continuity for quick checking of shorts
• · Auto-shut-off maximizes battery life so the meter works when you need it
• · Display hold function
• · One year warranty

• · 400 A ac current measurement
• · 600 V ac and dc voltage measurement
• · True-rms ac voltage and current for accurate measurements on non-linear signals
• · Resistance measurement up to 40 kΩ with continuity detection
• · Slim, ergonomic design
• · CAT IV 300V/CAT III 600 V safety rating
• · Hold button
• · Two-year warranty
• · Soft carrying case

• · 400 A ac current measurement
• · 600 V ac and dc voltage measurement
• · True-rms ac voltage and current for accurate measurements on non-linear signals
• · Resistance measurement up to 40 kΩ with continuity detection
• · Slim, ergonomic design
• · CAT IV 300V/CAT III 600 V safety rating
• · Hold button
• · Two-year warranty
• · Soft carrying case

• Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

Fluke 365 Detachable Jaw Clamp Meter

• 200 A ac and dc current measurement with detachable jaw
• 600 V ac and dc voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

• 600 A ac current measurement with fixed jaw
• 600 V ac and dc voltage measurement
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• CAT IV 300 V, CAT III 600 V
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case

• iFlex flexible current probe (sold separately) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
• CAT IV 600 V, CAT III 1000 V
• Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing personal protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

• iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
• CAT IV 600 V, CAT III 1000 V
• True-rms ac voltage and current for accurate measurements on non-linear signals
• 500 mV dc measurement range to interface with other accessories
• Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case

• iFlex flexible current probe expands the measurement range to 2500 A ac
• CAT IV 600 V, CAT III 1000 V
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Min, max, average and inrush recording to capture variations automatically
• Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case

Fluke 902 True RMS HVAC Clamp Meter

• Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements
• Small body and jaws fit perfectly in your hand and into tight places
• Handy 'Display Hold' button keeps measurements on the display
• Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch)
• Large, backlit display is easy-to-see in less than ideal conditions
• Auto shut-off maximizes battery life so the meter works when you need it
• Three year warranty

Measurement capability

• 400 A AC current measurement
• 600 V AC and DC voltage measurement
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 4 kΩ with continuity detection
• Temperature and capacitance measurement

Features

• Slim, ergonomic design
• Large, easy to read backlight display
• CAT IV 300V/CAT III 600 V safety rating
• Hold button
• Two-year warranty
• Soft carrying case

• Adaptor designed to increase the measuring capability of your clamp meters.
• With the use of the multi-tran you can not only extend current ranges but also on a conductor of larger diameter.

Kyoritsu  2012R Digital Multimeter with current measurements up to 120A AC/DC

• Innovative Multimeters with current measurements up to 120A AC/DC
• Unique Open Jaw technology for AC/DC current measurements
• Very compact and as reliable as a tradictional full size multimeter

• Can measure large AC current up to 2000A.
• Peak hold function.
• 55mm-dia large tear drop shaped jaws.

Kyoritsu 2002R Digital Clamp Meter

• Can measure large AC current up to 2000A.
• Peak hold function.
• 55mm-dia large tear drop shaped jaws.

• Equipped to measure both AC and DC current with transformer jaws of large diameter.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.

• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
• Accurate True-RMS reading of AC current or voltage with distorted waveform.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.

• High sensitivity, miniature AC/DC clamp meter.
• 0.1mA minimum resolution for AC current and 1mA minimum resolution for DC current.
• Output terminal for recorder connection.

• Tear drop shaped jaws for ease of use in tight places and crowded cable areas.
• Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411.
• Three functions in one unit; AC current, AC voltage and resistance.
• Resistance range provides audible continuity test.
• Frequency response from 40Hz to 1kHz on AC current and voltage ranges.

Kyoritsu 2027 Digital Clamp Meter

• True RMS reading instrument that permits precise measurements of nonsinusoidal waveform AC current and voltage. Accurate measurements are also possible at low frequencies from 10Hz upwards.
• Designed to meet internationally proven safety standards such as
IEC 61010-1, UL3111 and VDE0411.
• Three functions in one unit; AC current, AC voltage and resistance.

Kyoritsu 2031 Digital Mini Clamp Meter

• Can measure large AC current up to 200A.
• 24mm-dia tear drop shaped jaws.

Kyoritsu 2033 Digital Clamp Meter

• Smallest clamp meter capable of AC and DC current measurements.
• 300A auto ranging has minimum resolution of 0.01A AC/DC.
• Auto-zero function to allow one touch zero adjustment.

Kyoritsu 2040 Digital Clamp Meter

• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Thus, very useful for power distribution companies, power utilities and maintenance fields.

• Designed to meet international safety standard IEC 61010-1 CAT.IV 600V

Kyoritsu 2046R Clamp Meter (True RMS)

• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.

Kyoritsu 2055 Digital Clamp Meter

• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.

Kyoritsu 2056R Digital Clamp Meter

• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.

Kyoritsu 2117R Digital Clamp Meter

• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600V

• Ultra Slim and lightweight Handy design
• 1000A AC Clamp Meter AC40/400/1000A Auto Range
• Ø33mm Tear Drop Jaw easy to use in tight places
• DMM function ACV, DCV, Ω, Continuity Buzzer
• Fuseless electronic protection on up Ω/ to 600V
• IEC61010-1 Safety Standard
CAT III 600V (AC A) CAT III 300V / CAT II 600V (AC/DC V)

• Ultra slim and lightweight Handy design
• Ø33mm Tear Drop Jaw easy to use in tight places
• 1000A AC Clamp Meter
• DMM function ACV, DCV, Ω, Continuity Buzzer
• Fuseless electronic protection on "Ω/Continuity Buzzer" up to 600V
• Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V

• Flexible and light weight clamp sensor
• Wide reading range up to 3000A
• True RMS
• MIN MAX function
• Backlight LCD display
• IEC 61010-1 (CAT IV 600V / CAT III 1000V)

• Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement.
• Frequency filter switch to eliminate the effect of harmonics.
• Output terminal.
• Resolution 0.1mA.

• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal
• Resolution 0.1mA

• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges 20mA/200mA/200A.
• Rotary switch for easy one finger power-on and range selection.
• Resolution 0.01mA.

• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges:40mA/400mA/400A.
• Resolution 0.01mA.

• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges:40mA/400mA/400A.
• Resolution 0.01mA.

• 0.01mA resolution for DC current
• Top class measurement 0.2% accuracy
• Ø6mm clamp jaw easy to use in tight places
• Measurement from 0.01mA to 120.0mA
• Dual display with backlight shows both mA measurement and percent of 4-20 mA span
• Spotlight for illuminating measurement point
• Analog output terminal for recorder connection
• Complies with IEC 61010-1 CAT II 300V

• DC voltage range is also available especially for checking emergency battery operated power supply.
• Can measure temperature using optional probe.
• Tear drop shaped transformer jaws for ease of use.

• AC CLAMP ADAPTOR 
• Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters.
Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.

• AC Clamp Adaptor
• Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.

• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.

• High Sensitive Model
• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges:4mA/40mA/100A.
• Resolution 0.001mA

• Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

• Comply with CE safety standard
• Portable and simple one-hand operation
• 3 1/2 digits 1999 counts
• With Data Hold, Sleep Mode, Relative Mode and auto power off function
• Max. jaw opening: 30mm

• 3 3/4 digits 3999 counts.
• 1.0% best accuracy.
• Auto range.
• Overload protection.
• Extra function: duty cycle, relative reference, data Hold, sleep mode, auto power off, low battery indication.
• Jae Opening Size: max. 30mm

• UNI-T UT202A Auto-ranging AC 600 Amp Clamp Meter
• clamp multimeter UNI-T UT202A
• Safety Rating
• CAT II 600V
• CAT III 300V
• Certifications
• CE
• EN:61010-1
• EN:61326-1
• EN:61010-2-032
• Specifications
• AC Current 20A/200A/600A ±(1.5%+5)
• AC Voltage 2V/20V/200V/600V ±(1.2%+5)
• DC Voltage 200mV/2V/20V/200V/600V ±(0.8%+1)
• Resistance 200Ohm/2KOhm/20KOhm/200KOhm/2MOhm/20MOhm ±(0.8%+3)
• Features
• Display Count 1999
• Manual Range
• Jaw Capacity 28mm
• Diode
• Continuity Buzzer
• Low Battery Indication
• Data Hold
• MAX Mode
• MIN Mode
• Input Impedance for DCV Around 10MOhm
• General Characteristic
• Power 9V Battery(6F22)
• LCD Size 35.6mm X 18 mm
• Product Color Red and Grey
• Product Net Weight 220g
• Product Size 210mm X 75.6mm X30 mm
• Standard Accessories Battery, Test Lead,Carrying Bag, Gift Box, English Manual