Battery & Electrical Tools
• No pick up when generator is killed.
• Prevent form Audio lock up or Computer down when changing the car battery.
• Power supplier for home electric appliances.
• Emergency power supply.
• Easy and quick charge.
• Size:320 x 85 x 240mm
• Weight:9kgs
- Automatically maximizes battery life and performance with a built-in battery health mode
- Hybrid LED battery charging gauge with LCD display
Features
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
Technical Information
- Single-phase, portable battery chargers for charging lead accumulators
- With toggle switch for normal and fast charge (boost), quick start
- Equipped with protection against overloading and reverse polarity
- With ampere meter for charging and starting current
- Multiple charge current settings
- Mains voltage 230 V
Applications
- For charging 12V & 24Vbatteries
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Switch for 6 V and 12 V
- Switch for car and motorcycle
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- Microprocessor-controlled automatic charger
- Diagnostic system
- LED display (battery status, trickle charging, unit on, charging, and errors)
- Push button for setting charging current
- Charging leads with sturdy terminal clamps
- Power switches
- Electronic overload, voltage reversal and short-circuit protection.
- Microprocessor-controlled automatic charging
- fault diagnosis system
- LED indicators for power, voltage, battery fully charged battery is loaded, error
- Pressure switch for setting the charge current ( 2/6/12 amps)
- Pressure switch for on / off
- Pressure switch for 12 volts dc Output on / off with LED indicator
- Pressure switch for current battery voltage
- Charging cable with terminal clips
strong - Fault output to triple-digit LED display
- cigarette lighter socket for 12 volt dc
Output - Electronic overload, reverse polarity and short circuit protection
- Power cable with European plug
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Charging electronic
- Sheet steel housing
- Carrying handle
- Switch for automatic and normal charging
- Switch for normal and rapid charging
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- Flush solvent performs all mechanical actions required to clean out contaminated systems.
- The cylinder is equipped with a top inlet fitting and a side outlet for connecting to compressed
- Test Condition without Shutting Down Battery.
- Simultaneously Measure Battery Resistance, Voltage, Current.
- Compact and Lightweight.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
|
SMART 450 |
|
220v ~ 240v (1 phase 50hz) |
|
450A |
|
12V ~ 24V |
|
1 ~ 60A (Adjustable) |
|
12V Start – 5.4 KW / 24V – 8.4K |
|
37.0kgs |
|
STM 2410 |
|
220v ~ 240v (1 phase 50hz) |
|
2 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 3A, Output MCB 16A |
|
240mm x 270mm x 160mm |
|
8.0kg |
|
STM2420 |
|
220v ~ 240v (1 phase 50hz) |
|
2 x 12v |
|
Max 20A (Selectable) |
|
Input Fuse 5A, Output MCB 25A |
|
340mm x 330mm x 300mm |
|
16.5kg |
|
STM2460 |
|
220v ~ 240v (1 phase 50hz) |
|
350A |
|
12V ~ 24V |
|
1 ~ 60A (Adjustable) |
|
12V Start – 4.2 KW / 24V – 8.4K |
|
50.5kg |
|
STM 4810 |
|
220v ~ 240v (1 phase 50hz) |
|
4 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 5A, Output MCB 15A |
|
340mm x 330mm x 300mm |
|
16.5kg |
|
STM 9610 |
|
220v ~ 240v (1 phase 50hz) |
|
8 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 7A, Output MCB 15A |
|
340mm x 330mm x 300mm |
|
25.0kg |
|
STM10810 |
|
220v ~ 240v (1 phase 50hz) |
|
9 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 7A, Output MCB 15A |
|
340mm x 330mm x 300mm |
|
26.5kg |
- Charging Voltage( VDC ):12V
- Charging Current ( A ):5A
- Dimensions H x L x W:120X160X220
- Weight ( kg ):3.0
- Single-phase, portable battery charges for charging lead-acid batteries with 12/24V voltage.
- Protected against overloads and polarity reversal.
- Equipped with selector for normal or quick charge.
- Eqipped with ammeter.
- Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
- Characteristics: choice of normal charge, quick charge (BOOST), quick start
- Display of charging and starting current
- Protection against overloads and polarity reversal.
- Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
- Characteristics: choice of normal charge, quick charge (BOOST), quick start
- Display of charging and starting current
- Protection against overloads and polarity reversal.
- Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
- Characteristics: choice of normal charge, quick charge (BOOST), quick start
- Display of charging and starting current
- Protection against overloads and polarity reversal.
Features
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost). The unit is then switched back to "start" in order to start the vehicle.
Technical Information
- Single-phase, portable battery chargers for charging lead accumulators
- With toggle switch for normal and fast charge (boost), quick start
- Equipped with protection against overloading and reverse polarity
- With ampere meter for charging and starting current
- Multiple charge current settings
- Mains voltage 230 V
Applications
- For charging 12 V batteries
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
Features
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
Technical Information
- Single-phase, portable battery chargers for charging lead accumulators
- BL400 with engine starter for vehicles with diesel engines (up to 70 bhp)
- With toggle switch for normal and fast charge (boost), quick start
- BL220, BL400 charge voltage 12 V – 24 V, switchable
- Equipped with protection against overloading and reverse polarity
- With ampere meter for charging and starting current
- Multiple charge current settings
- Mains voltage 230 V