- Auto ignition for starting and operating easily and safely under any condition.
- Safety ignition switch complies with CPSC standard to prevent children misuse.
- With TR90 high transparent nylon gas tank features long service life and more safety.
- Butane is easy to refill and check with see-through fuel window.
- Comes with a ceramic heater, which prolongs service life.
- Adjustable flame control for precision use.
- Complete kit in a plastic box meets various multi-functional operating purposes.
- Plastic case may be used as a support stand.
- Compact and lightweight: most convenient tool in its class for fatigue-free working
- Variable 2-speed design covers wide range of drilling, fastening applications
- Powershare 12V battery is interchangeable with other WORX 12V tools
- LED light increase visibility-great for dark or enclosed area
- Warranty: 12 Months
- working surface area: 150mmX80mm
- Whole dimension: 260mmLx100mmWx150mmH
- Pro'sKit PK-2086B is a basic electrical kit.
- 13 elements in set.
- Standard Plug: E.
- Soldering Voltage – 110V.
- Case size – 195 × 305 × 50 mm.
- Weight – 1,5 kg.
- Individual Packing– Color sleeve Shrink.
- Fast start-up feature to reach 365°F/185°C in 12 seconds. Equivalent to a 9 Watt iron at 450°C max. Approximately 30 minutes of continuous use. ...
- Pro'sKit SI-B161 - battery operated soldering iron.
- Fast start-up feature to reach 365 °F/185 °C in 12 seconds
- One tip changer tool, one coil solder wire, and a safety cap (included)
- Equivalent to a 9 Watt iron at 450 °C max.
- Lightweight and completely portable
- Solder up to 160 joints with fully charged batteries
- Approximately 30 minutes of continuous use
- Long life, iron-plated tip
- Individual packing: Blister Card
- Fully adjustable for depth of cut, cutter alignment and size of mouth.
- Cutter seats at 21 degrees.
- Ideal for end grain and general purpose fine finishing.
- Capacitance and temperature measurement function.
- Digital multimeter Proskit MT-1280 with capacitance and temperature measurement function.
- Heavy Duty Poly-Vinyl Apron
- Made of PVC on polyester broadloom fabric
- Great resistant to chemical fat, oils & grease Neck loop & waist ties is made from cotton for extra comfortable
- Size : 28'' x 40''
- .Contains 80 items most commonly used hand tools Useful for maintenance of the production hall for minor work in mechanical workshop or garage.
- .The box is made of galvanized sheet
- .Socket made of durable tool steel CrV 50BV30
- .Ratchet has 72 teeth made of stainless CrV 6140
- .Bits are made of stainless steel AISI S2
- Case size: 337x210x58 (mm).
- 18 elements in set.
- The tools are fixed on the internal walls of the bag.
- The contents list is available at "Detail".
- Weight: 1.7 kg
- Standard Plug: B.
- Compact digital soldering station with precise Celsius or Fahrenheit temperature adjustment. Temperature range from 200 to 480°C (392 to 896°F).
- Pro'sKit SS-206B is a compact digital soldering station with precise temperature adjustment for repairing the cell phones and other small electronics.
- Adjustable precise temperature control.
- Celsius or Fahrenheit temperature setting.
- Temperature range from 200 to 480°C (392 to 896°F).
- 110 V / 220 V switch.
- Insulated and ergonomic soldering iron handle.
- Compatible with a wide range of soldering iron tips.
- Flux-resistant copper bit ensures long soldering life
- Lightweight comfortable wooden handle
- Voltage 220v
- For home workshop, repairs, hobbies & stained glass applications
CODE |
BLADE (INCH) |
L (INCH) |
H (INCH) |
D (MM) |
|
82- MS175 |
12 |
16 |
7 |
|
|
- Powerful lighting inspection lamp with 5W COB LED
- .Rugged ABS material Housing
- .Brightness: 230 Lumen
- .450 Lux at 0.5 meter
- .Splash-proof IP54
- .Pocket clip and bottom magnet for hands-free use
- .Powered by 3 x AAA batteries (included)
- .Dimensions = L165 x W25 x H30 (mm)
- .Made in Taiwan
- Both the 12-247 and 12-220 have machined sides
- Cutter rests at a 21° angle, ideal for cross-grain planing
- Cutter is fully adjustable for depth of cut and alignment
- Gray, cast-iron base with precision-ground sides and bottom
- Durable epoxy coating provides long-lasting protection
- Finger-rest at front of plane adds comfort and control
- This professional electronic tool kit is a complete tool kit for electronic maintenance or repair job, including meter, soldering iron, stripper, ESD wrist strap, screwdriver, cutter, plier and tweezer in a durable tool carrying bag.
- Interchangeable bars maximize versatility
- Reduces the number of tools user needs to carry
- Tip Type Multi-Bit
- Includes
- 1/8" Standard Bar
- 3/16" Standard Bar
- 1/4" Standard Bar
- 0pt Phillips® Bar
- 1pt Phillips® Bar
- 2pt Phillips® Bar
- 1 Tack Puller
- 1 Brad Awl
- 1 Hook Driver
- Handle
- Storage case included
- 7 Pockets Nylon Carpenters Tool Pouch c/w Work Belt
- Size: 250x315mm
- Belt:1180x57mm
- Smoothing plane
- Manufactured to uncompromisingly high standards
- Suitable for both hard and soft woods
- Supplied with a tungsten vanadium cutter blade
- Accurately machined blade setting
- Full adjustments
- Selected hardwood handle and knob
- Cast iron base frog and lever cap
- Traditional brass adjusting nut
- Smoothing Planes - the most frequently purchased plane used for final finishing work and ideal for general work
• Well designed tool removes upholstery clips in just a few seconds.
• Place the tool under the edge of door panel & insert in fastener then pry up.
- Solid cast construction
- Accurate positioning in two directions (crossed)
- Heat treated steel jaws
- Secures firmly on drill press table & moves similar to vertical mill
- Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities
- Microprocessor controlled and anti-static implementation.
- The automatic cooling increases the uptime of the station and its components.
- Digital indicated temperature of the hot air gun and soldering iron.
- Compatible with series T soldering iron tips from AOYUE and other HAKKO-compatible tips.
- Compatible with Replacement Air Nozzles from AOYUE
- Pro'sKit PK-2801 is an 8 piece set. This tool kit is essential for working with hi-voltage electrical items. Supplied in a zipped tool bag.
- Steel Toe Cap
- Steel Mid Sole
- Slip Resistant Sole
- Genuine Leather
- Side Lock Stitch Attach Upper
- Colour: Black
- Browguard Visor Holder
- Type : Durable & ideal choice for excellent face protection
- Adaptability : Lightweight & comfortable with adjustable for height adjustment & ratchet locking system.
- Material : HDPE
- Weight : 175g
- Packaging : 1 pcs /polybag
- - HI-LOW adjustable pressure (Hi: 15±2kg, Low: 10±2kg)
- - 110/88,66 with cut function
- - Storage chamber
- - The nonslip handle provides easy operation and user comfort.
- - Integral blade storage chamber on the end of the handle for a spare blade, more convenient.
- - Increased HI/LOW impact forces to meet demands of all category cables through Cat 6.
- - Materials: Housing: ABS, Blade: 40Cr
- - OAL:146mm
- Complies with the newest CE safety standard
- 3 1/2 digits 1999 counts.
- High measuring accuracy: ±0.5%.
- Measurements are possible even under a strong magnetic field.
- LCD display for low power consumption and clear readout even in bright ambient light conditions.
- Zero knob: Knob to zero when testing low capacitance.
- Extra function: LCD backlight, low battery indication
- 1 pc - 18 liter Pail
- 2 pcs - Universal Sorbent Sock MOS-SOC7612 ( 1 pc-able to absorb > 8.25 liters)
- 2 pcs - Universal Sorbent Pillow MOS-PIL2025 ( 1 pc-able to absorb > 2.5 liters)
- 5 pcs - Universal Sorbent Pads MOS-LMT2002 ( 1 pc-able to absorb > 0.725 liters)
- 2 pcs - Hazardous material disposable bag 24" x 30"
- 2 pcs - Cable Tie
- 1 prs - Anti Fog Goggle
- 1 prs - Nitrile Glove
- Inductance to 20H
- Capacitance to 200µF
- Resistance to 2000MΩ
GAAT0805 | 3 |
FBAB0108~0315 Phillips Anti-Slip Screwdrivers PH1x80, PH2x100, PH3x150 |
1 | FBBB0203 Stubby Phillips Anti-Slip Screwdriver PH2x25 |
|
3 |
FAAB0410~6E15 Slotted Anti-Slip Screwdrivers 4x100, 5.5x100, 6.5x150 |
|
1 | FABB6E03 Stubby Slotted Anti-Slip Screwdriver 6.5x25 |
- A single handed clamp offering a clamping pressure of 250Kg
- A tool-free quick change function allows the jaws to be reversed to perform a spreading action
- Features longer length jaws with a unique swivelling action to keep constant pressure on uneven surfaces
- They also have a bar rest to allow you to place larger items in the clamping jaws hands-free
- Removable Pads snap fit to prevent loss
- Provide excellent grip to the work surface
- Reduces marking of the work piece
- Patented POWER LOCKS™ hold more pressure, longer.
- 3-3/4" Throat Depth
- Removable Full Face Pads
- I-Beam Bar for reduced flexing and bowing
- Quick Change Screw to allow for easy conversion to spreader
- Adjustable Foot
• Tear drop shaped jaws for ease of use in tight places and crowded cable areas.
• Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411.
• Three functions in one unit; AC current, AC voltage and resistance.
• Resistance range provides audible continuity test.
• Frequency response from 40Hz to 1kHz on AC current and voltage ranges.
- Place withdrawal probe in dipstick tube and begin pumping. When unit is filled to capacity internal float shuts off preventing overfilling.
- Pressure relief valve allows handle to return to carrying position for ease of transportation.
- Pouring spout allows for clean transfer at a proper disposal facility making recycling easy.
- Manual / Pneumatic Fluid Extracting
- Capacity: 6.0 Liter
- Suitable also for low viscosity fluids
- Expert Quality, ideal for one person operation.
- For the extraction of oils from motor vehicles, motor bikes, marine engines, gearboxes, generators etc.
- without the removal of the oil drain plug.
- Easily operated by using either hand pump action or compressed air supply.
- Supplied complete with 1.5M of suction tube and three extraction straws (Air Hose not Included)
- Suitable also for low viscosity fluids
- Drop forged carbon steel
- Chrome plated, satin
- Proper heat treated
- Smooth open/close roller action
• High sensitivity, miniature AC/DC clamp meter.
• 0.1mA minimum resolution for AC current and 1mA minimum resolution for DC current.
• Output terminal for recorder connection.
- Brand Stanley
- Input Power 580W
- Voltage 220V ~ 240V
- Disc Capacity 100mm
- Switch Tongle
- No Load Speed 12,000 RPM
- Weight 1.55KG
• High sensitivity DC20kΩ/V.
• 1m drop-proof heavy duty designed taut-band movement.
• Can measure line voltage up to AC 600V.
(Voltage to ground MAX AC300V)
(Protected by 600V ceramic fuse against accidental overload)
• Continuity buzzer, battery check, LED check, temperature
measurement function.
• Skeleton type robust and clear case
with carrying handle furnished as standard accessory.
- Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
- New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
- Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures
- Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure
- Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
- Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
- TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip
- Probes always show correct category rating for tip being used
- Environmental ratings: -20°C to 55°C (-4°F to 131°F), altitude: 2000 m (6,562 ft)
- Conforms to EN61010-031
- One-year warranty
- 100kg
- Top working surface area: 410mmX140mm
- Whole dimension: 700mmLx270mmWx310mmH
- 3 diopter (1.75X magnification) glass lens.
- New improved clamp-on sponge design for firm contact on smooth surfaces and mounts to any bench or desktop.
- Even, shadow-free light under the magnifying lens with 9-watt fluorescent tube will make it easier for you to see and enjoy the activities longer.
- Spring balanced adjustable arm for easy maneuverability and positioning.
- Easy to replace the fluorescent tubes.
- Certificate EN ISO20345 S3Upper
- MaterialEmbossed Buffalo Leather + Codura + PUOut
- Sole MaterialDual Density Injected PUMidsole MaterialKevlarToecup MaterialComposite –
- Metal FreeApplication FieldAll Purpose –
- Management – Engineers
- 14Oz capacity for grease.
- Input pressure from 40~150psi.
- Output pressure from 1600~6000psi.
- Commodity serial number: HRP3225
- Type: Manual-like
- Oil pumping distance: 1.5M
- Presses the oil distance: 6M
- Available liquid: Lamp oil, light oil, A heavy oil
- Puts out ability (L/min): 28
- Rotation number: Approximately 70 chapter of/minutes
- Weight (kg): 1.3
- Span (m): 1.3
- Emissivity: 0.95
- Temperature range: -18 ~ 280°C
- High measurement precision: +/- 2°C or 2% (Condition 23°C +/- 2°C)
- Repeat precision: < +/- 0.5°C or +/- 0.5%
- Resolution: 0.1
- Response time: 500 mS
- Scan
- Display hold
- Max/min measurement
- White-backing light
- Close laser
- °C/°F selection
- GENERAL CHARACTERISTICS:
- Power: 9 V battery x 1
- LCD size: 22 x 22 mm
- Product size: 270 x 90 x 40 mm
- Product weight: 185g
- Made from fine grey iron with all working surfaces accurately machined for precise results
- Two cutter positions for regular and bull nose work
- The cutter is adjustable for depth-of-cut in the rear position
- To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied
- A cutting spur is also provided for cross grain work
1) Acriflavine Solution 30ml – 1
2) Liniment Methly Salicytate 30ml – 1
3) Antiseptic Cream 15ml – 1
4) Antiseptic Lotion 50ml – 1
5) Absorbent Cotton Wool (w/box) 5gm – 1
6) Gauze Swabs (w/box) 8pcs – 1
7) W.O.W Bandage 5cm x 5.5cm – 1
8) Medical Oil 3ml – 1
9) Plaster Strips-Fabric – 10
10) Paracematol Tablets (Axcel) – 10
11) Alcohol Swabs – 2
12) Adhesive Plaster-Roll – 1
13) Scissor Flodable-Small – 1
14) Tweezer – 1
15) First Aid Book – 1
16) Usage Card – 1
• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges 20mA/200mA/200A.
• Rotary switch for easy one finger power-on and range selection.
• Resolution 0.01mA.
Capacity | 10 L |
Overall Depth | 195 |
Overall Length | 319 |
Overall Weight | 0.82 |
Overall Width | 329 |
Weight Each | 900 g |
- The open design of the clamp makes it possible to nail and glue joints under clamping pressure
- In addition to its function as a mitre framing clamp, it has many general purpose uses and is an ideal tool for pattern makers
- The body mounting holes enable the clamp to be screwed to a bench
- The clamps have to countersunk holes for fixing to a wooden block, which can be secured between the jaws of a bench vice.
- Thanks to the precision machined clamping surfaces and open design, these clamps are straight forward to operate and provide easy access for glueing and nailing.
Pro'sKit MT-1710 3-3/4 True-RMS Auto Range Multimeter
- True RMS digital multimeter which measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature and can be used for continuity and diode tests.
- Pro'sKit MT-1710 is a True RMS digital multimeter which measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature and can be used for continuity and diode tests.
- 1.Remove noxious fumes quickly, safely and efficiently
- 2.The fan is fully adjustable, quiet, and long service life.
- 3.Portable and desktop design, easy to place and move, low noise and long life service
- 4.The replaceable filter is made by urethane foam with refined, activated, high absorption carbon
- 5.Dimension (O.D.): 220*270*168mm
- Chrome plated steel screw with swivel pad
- Heat treated steel bar
- Hardwood screw handle
- Use for a firm hold on your metal fabricating or woodworking projects
- Irwin quick-grip handi-clamp with throat depth of 2"(51mm).
- The Bailey fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards.
- It is fully adjustable and has a machined frog and cutter seatings to reduce chatter.
- It also has a special cap iron design which curves shavings and prevents clogging.
-
A super mill electric drill with an efficient, high speed motor and encassed in a rugged high impact polystyrene body. Features in performance include low vibration, high torque and a lightweight ergonomically designed. Body shape to fit naturally and comfortable into the hand. The quick-change chuck is ideal for drilling, polishing engraving, routing, shaping, sending and milling.
- Pro'sKit SS-554B is a compact 300 W soldering pot which can be used for tin coating and preparation of electronics components and leads. Pro'sKit SS-554B is suitable for both lead and lead-free applications.
- Designed with electronic control board and high quality components
- Crucible is made of stainless steel with titanium plating
- Comes with iron chromium aluminum wire heater
- Suitable for melting solder, plastic, resin and more.