- Country of Origin: China
- Tray weight: 2.5kg
- Frame weight: 5.7kg
- Total weight: 8.2kg
- Country of Origin: China
- Tray weight: 2.4kg
- Frame weight: 6.4kg
- Total weight: 8.8kg
- Thickness: 1.0mm
- Frame Joint: Welded
- Tray weight: 5.5kg
- Frame weight: 7.3kg
- Total weight: 12.8kg
- Thickness: 1.0mm
- Frame Joint: Welded
- Tray weight: 6.0kg
- Frame weight: 7.0kg
- Total weight: 13.0kg
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
- High vantilation performance and exhaust odour.
- Operation - Maximum 10 hours
- If operate more than 10 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Terms & Condition Apply)
- High vantilation performance and exhaust odour.
- Operation - Maximum 14 hours
- If operate more than 14 hours,have 30 minutes interval to extend the usage life.
- 3 months warranty on motor* (Terms & Condition Apply)
- .3 ton (6,000 lbs) load capacity
- .200 degree turning radius allows room to maneuver in tight quarters
- .Articulating 7 in. poly-over-aluminum steer wheels ensure continual contact with uneven floors
- .One-piece cast pump features high quality seals, hardened and chrome plated ram and piston, top-of-stroke and overload safety bypass valves
- .Smooth, special lowering valve for controlled descent
- .Single point valve replacement for quick and easy rebuild
- .Rounded fork tips with nylon guide rollers for trouble-free pallet entry and exit
- .Solid steel push rods never need adjustment
- .Wheel bearings are double sealed and lifetime lubricated
- .Ideal for warehouse, supermarkets, distribution centers, factories, stockrooms, storage facilities and loading docks
- .Engineered to provide years of trouble-free service even under toughest working conditions
- Drop forged carbon steel
- Chrome plated, satin
- Proper heat treated
- Smooth open/close roller action
- Unique on-board storage design for all accessories
- Powerful 1400W motor
- 100 Bar Max Pressure
- With handle & wheel for easy carrying
- Cast aluminum pump for improved durability
- Auto Stop System
- Unique on-board storage design for all accessories
- Powerful 18ooW motor
- 140 bar max pressure
- With handle & wheel for easy carrying
- Cast aluminum pump for improved durability Auto Stop System
- Accessories for STPW1800 include:
- Sm high pressure hose, variable nozzle, rotating nozzle, fixed brush, soap bottle, quick connect adaptors
- 1/2" wide blade with easy-to-read markings
- 2-sided blade graphics with fractional inch/decimal foot scales
- Polymer-coated blade withstands abrasion
- High-impact ABS case with durable rubber grip holds up to heavy use
- Corrosion-resistant Tru-zero folding end hook for accurate measurements
- Rewinds 3X faster than 34-900 Stanley® Long Tape with 3:1 gear drive
- 40 fiberglass strands for strength and durability
- 1/2" wide blade for easy readability
- 2-sided blade graphics with fractional inch/decimal foot scales for versatility
- Polymer-coated blade withstands abrasion
- High-impact ABS case with durable rubber grip holds up to heavy use
- Blade bumper to help prevent blade damage
- Impact resistant moulded ABS frame with ground spike
- Tufcote polyester coated steel tape
- High impact polymer centre
- Low friction bearing for smooth rewind
- Long winding lever and easy-grip knob
- Corrosion resistant end-piece
- Low friction mouthpiece insert
- Reduce Electricity Cost
- No Rinsing Required
- Extended Air - con Life
- DIY + Professional Result
- Safe On Fins And Coils
- Lightweight multi-purpose pipe wrench
- Suitable for the professional heating and plumbing installer and professional builder
- Sintered high carbon steel upper jaw for strength
- Hardened serrated steel jaw teeth
- Lightweight but strong aluminium sliding body
- Fitted with quick release trigger
- Useful for one handed operation, for hard to reach areas
- Also ideal for tightening and loosening plastic fittings
- Double lock stitch (DSL)
- Steel toe cap
- Steel midsole
- Slip resistant sole
- Genuine leather
- Double lock stitch (DSL)
- Steel toe cap
- Slip resistant sole
- Genuine leather
- Double lock stitch (DSL)
- Steel toe cap
- Slip resistant sole
- Genuine leather
- Steel toe cap
- Slip resistant outsole
- Genuine leather
- Steel toe cap
- Slip resistant outsole
- Genuine leather
- Available from 4 to 12 steps
- Double riveted non-slip feet
- Extra wide top for temporary tool placement
- Non conductive fiberglass stiles and fully weather resistant
- Available from 4 to 16 steps
- Attractively powder coated
- Non-slip ladder shoes provide firm grip on floor
- Extra wide steps for comfortable foot resting
- Available from 4 to 16 steps
- Heavy duty side rails for exceptional load rating
- Wide non-slip step provide comfort and stability
- Rigid back leg support
- Heavy Duty Siderail for exceptional load rating
- Weather resistant
- Non-conductive, ideal to use when electrical hazard exists
- Wide non-slip heavy duty triangular rungs provide secure footing
- Heavy duty cast aluminium shoes with thick rubber tread. Full swivel safety shoes can be used with tread down or in spike position
- Available from 3 to 8 steps
- Heavy duty stile and back support add rigidity
- Large platform (10" x 10") for stability at work
- Easy storage: When folded, ladder measures only 4 inches which makes the staring an easier task
- Safety guide rails: Safety guide rail which built into the front stile to support user's foot in standing position and while ascending or descending the ladders
- Extra large platform: Slip resistant textured surface platform provides extra stepping surface
- High grib rubber: HIgh grib rubber shoes ensure outstanding grip performance
- Rigid steps: Rigid steps with strong underneath support beams intergrated to its design. PVC cap ensures the sharp edges are rounded off and strengthens the durability of steps
- Available in 3 sections of extended length from 4.8m to 14.4m
- Wide non-slip heavy duty 'D' rung provide secure footing
- 3-stage cold-formed twist proof rung-stile attachment give extra safety
- Heavily ripped stiles for firm hand-hold
- Solid cast aluminium hook give extra confidence
- Available from 2.4m to 6.0m
- Wide non-slip heavy duty 'D' rung provide secure footing
- 3-stage cold-formed twist proof rung-stile attachment give extra safety
- Heavy ribbed stiles for firm handhold
- Ladder feet provide firm grip
- D rung with extra wide stepping surface for comfortable and secure footing
- No slip rubber shoes for excellent traction on surface
- Manufactured to uncompromisingly high standards
- Suitable for both hard and soft woods
- Supplied with 2 inch tungsten vanadium cutter blades
- Designed for the initial preparation of rough timber the long base bridging undulations which a shorter plane would tend to follow
- Tungsten vanadium cutter blade
- Accurately machined blade setting
- Full adjustments
- Cast iron base frog and lever cap
- Traditional brass adjusting nut
- For the preliminary squaring of rough timber
- The general workhorse for stock removal
- Smoothing plane
- Manufactured to uncompromisingly high standards
- Suitable for both hard and soft woods
- Supplied with a tungsten vanadium cutter blade
- Accurately machined blade setting
- Full adjustments
- Selected hardwood handle and knob
- Cast iron base frog and lever cap
- Traditional brass adjusting nut
- Smoothing Planes - the most frequently purchased plane used for final finishing work and ideal for general work
- Specially made to deal with plastic laminates and other man-made materials besides wood
- Cutter set at 12.1/2 degrees
- Mouth adjustments for coarse or fine work and end grain
- Fully adjustable for depth-of-cut with cutter held firmly by lever and cam
- For use by craftsmen and cabinet makers.
- Excellent fine finish on end grain , satin smooth finish on straight grain.
- Cutter blade held firmly in place by lever cap.
- Machined base and sides for accuracy.
- Lateral adjusting lever for cutting alignment.
- Professional Mist Duster Turbo, suitable for large scale agricultural dusting application.
- Turbo Version is powerful and longer range, can spray upwards and vertically.
- Easy operation, trigger like handle for easy control.
- Low Vibration.
- Proven Quality and Performance.
- Ogawa Stainless Steel Pressure Sprayers are suitable for use by the home gardener, hobby farmer, small business and pest control operator for the application of weed and pest control products, disinfectants and cleaning solutions.
- .These Stainless Steel Pressure Sprayers are made from high quality material for maximum durability with readily available parts for easy service.
- .Ogawa Stainless Steel Pressure Sprayer are suitable for the applications in small areas, difficult to access areas, and for spot spraying.
- Power :4.8kW/3600rpm
- Dear Shifting: 1F1R
- Tilling Scope/Depth:900/150-300mm
- Transmission Oil Capacity:0.95L
- NW:60kg
- Lightweight and portable
- .Powerful
- .Low Vibration
- .Durable Oregon Saw Chain (Made in USA)
- Light weight & high durability
- Easy starting and smooth running
- Advanced technology engine with low vibration
- Fuel efficient
- Easy to use
- Simple to maintain
- Versatile, powerful and durable
- A high quality chainsaw which get your job done
- Equipped with USA Oregon chain saw, Japan Walbro carburetor
- Meets European emission standards EURO-II
• 4 x bearing wheels for durable maneuver
• Large Grass catcher for high capacity grass collection
• Adjustable cutting height
• Easy cleaning and no mess.
• Delivers low noise and good tonal quality
• Float Feed Carburetor. Optimized fuel delivery for improved start-ability and superior performance
• Oiled Foam Air Cleaner. Provides protection against airborne debris entering the engine
• Splash Lubrication. Ensures adequate lubrication throughout the crankcase during normal operating conditions.
• OHV Technology. Optimized performance that delivers longer engine life and improved fuel economy
• Safety clutch system installed – so that once release engine automatically stops to prevent any injuries.
• 2 way fold-able for easy storing.
• Cutting width 18" / 460mm
- .Powerful
- .Low Vibration
- .Durable Oregon Saw Chain (Made in USA)
- Powerful
- .Low Vibration
- .Durable Oregon Saw Chain (Made in USA)
- .Powerful
- .Low Vibration
- .Durable Oregon Saw Chain (Made in USA)
- Powerful
- .Low Vibration
- .Durable Oregon Saw Chain (Made in USA)
- Cost Effective and low maintenance.
- noise reduction.
- powerful air stream.
- Irwin quick-grip handi-clamp with throat depth of 3"(76mm).
- Irwin quick-grip handi-clamp with throat depth of 2"(51mm).
- IRWIN Record Medium Duty clamps have a thin frame for getting into tight corners and confined spaces, yet are very strong and rigid.
Features
- Recommended particularly for metalworking and fabrication work where a very high clamping force is demanded.
- Drop-forged steel frame for strength and durability. Recommended for heavy duty metal and fabrication work.
- Swivel shoe helps clamping on uneven surfaces.
- Twin-start Acme cold rolled thread for faster operation.
- Fused steel handle will bend before the clamp can be overstressed.
- Made from SG ductile iron.
- For use when clamping well in from the edge.
- This heavy duty clamp have a bar section of 32mm x 6mm (1-1/4" x 1/4").
- The slide and head are guaranteed unbreakable.
- The slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar.
- TPE PADS: Provide friction to work surface. Reduce marking of work piece.
- 3-COMPONENT HANDLE: For higher torque transfer than wood, plus added comfort.
- IMPROVED DESIGN: New improved Rib location to improve strength at less weight.
- I-BEAM DESIGN: Provides higher mechanical strength and less torsion. Zinc plated for rust preventation.
- The open design of the clamp makes it possible to nail and glue joints under clamping pressure
- In addition to its function as a mitre framing clamp, it has many general purpose uses and is an ideal tool for pattern makers
- The body mounting holes enable the clamp to be screwed to a bench
- The clamps have to countersunk holes for fixing to a wooden block, which can be secured between the jaws of a bench vice.
- Thanks to the precision machined clamping surfaces and open design, these clamps are straight forward to operate and provide easy access for glueing and nailing.
- The open design of the clamp makes it possible to nail and glue joints under clamping pressure
- In addition to its function as a mitre framing clamp, it has many general purpose uses and is an ideal tool for pattern makers
- The body mounting holes enable the clamp to be screwed to a bench
- The clamps have two countersunk holes for fixing to a wooden block, which can then be secured between the jaws of a bench vice.
- Thanks to the precision machined clamping surfaces and open design, these clamps are straight forward to operate and provide easy access for glueing and nailing.
- Using a pair of 130N clamp heads, a bar clamp of any length can be easily made using a piece of timber 1in thick
- Cast iron head and slides incorporating large thrust surfaces
- High quality steel handle and screw with pin attached by welded chain
- Low cost alternative to full size bar clamps.
- Ideal for both metal and wood working applications, the IRWIN Record 120 is the most popular and widely used of G-clamps.
- Capacitor Start Capacitor Run Motor.
- Single Phase provide high starting torque & lower running current.
- Built-in Thermal Overload Protection.
- Electric motor comply to CE International Standard.
- Cast iron construction & individual radial fins cylinders allow better cooling for durability & continuous duty.
- Oversized roller bearing for heavier duty, industrial quality & longer compressor life.
- Package rated working pressure 8 bar, bare unit maximum pressure 10 bar.
- Standard package with Automatic Start/Stop with Full Voltage Starter.
- Option available for Constant Speed Control.
- Large induced draft amount, and it has a long service life.
- · Large air flow, low noise, spare electricity power.
- · Utilizes CAD optimized design for blade, with high efficiency.
- · Suitable for school, hotel, home for ventilation.
- Stable, precise working machine with multi-stage belt drive spindle with ground plate
- Casting table
- Safety switch with zero voltage switch prevents the self-restart if a power failure
- Infinitely adjustable table
- Table tilted sideways and swivel out
- Fold-chip protection
- Adjustable drill depth stop
- Keyed chuck.
- 12 speed settings from 220 – 2,450 min-1
- V-belt drive, speed setting with stepped belt pulley
- Drilling spindle with ball bearings
- Scroll chuck
- MK2 chuck
- Folding chip guard
- Swiveling scale ring for precise drilling depths
- Drill table can be tilted and swiveled
- Incl. vise
- Infinitely variable adjustment of table height
- Stable foot with slots for vise fastening
- ON/OFF switch with zero-voltage release
- High-quality rubberized handles
- 9 speed settings from 280 – 2,350 min-1
- V-belt drive, speed setting with stepped belt pulley
- Drilling spindle with ball bearings
- Scroll chuck
- Folding chip guard
- Swiveling scale ring for precise drilling depths
- Drill table can be tilted and swiveled
- Infinitely variable adjustment of table height
- Stable foot with slots for vise fastening
- ON/OFF switch with zero-voltage release
- 12 speed settings from 210 – 2,220 min-1
- V-belt drive, speed setting with stepped belt pulley
- Drilling spindle with ball bearings
- Reverse facility
- Quick-change drill chuck
- MK3 chuck
- Folding chip guard
- Swiveling scale ring for precise drilling depths
- Drill table can be tilted, swiveled and pivoted
- Drill table with grooves for catching coolant
- Incl. vise
- Infinitely variable adjustment of table height
- Stable foot with slots for vise fastening
- ON/OFF switch with zero-voltage release
- High-quality rubberized handles
- Electronic speed control
- Easy and quick sanding belt change
- Exact belt position with precision adjustment
- Adjustable additional handle for optimum work
- Chip extractor adapter and dust collection box
- Hinged front cover
- Soft grip
- Cable clip
- 1 sanding belt
- Microprocessor-controlled automatic charger
- Diagnostic system
- LED display (battery status, trickle charging, unit on, charging, and errors)
- Push button for setting charging current
- Charging leads with sturdy terminal clamps
- Power switches
- Electronic overload, voltage reversal and short-circuit protection.
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Switch for 6 V and 12 V
- Switch for car and motorcycle
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Charging electronic
- Sheet steel housing
- Carrying handle
- Switch for automatic and normal charging
- Switch for normal and rapid charging
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- Microprocessor-controlled automatic charging
- fault diagnosis system
- LED indicators for power, voltage, battery fully charged battery is loaded, error
- Pressure switch for setting the charge current ( 2/6/12 amps)
- Pressure switch for on / off
- Pressure switch for 12 volts dc Output on / off with LED indicator
- Pressure switch for current battery voltage
- Charging cable with terminal clips
strong - Fault output to triple-digit LED display
- cigarette lighter socket for 12 volt dc
Output - Electronic overload, reverse polarity and short circuit protection
- Power cable with European plug
- Saw table infinitely tiltable from 0° to 45°
- Blade guide infinitely adjustable in height
- Parallel stop
- E-Stand
- Support feet
- Angle stop
- 2 blade speeds
- Push stick
Power supply: Solar operation
Protection stage (bright/dark): 4 / 9-13
Optical grade: 1
Light scatter grade: 2
Homogeneity grade: 3
Viewing window: 98 x 43mm
Shade time: 1 / 30000s
- Convenient electrode storage
- Turbo cooling by integrated cooling fan
- Thermo cut out with indicator light
- Welding shield included
- Continuously adjustable welding current
- Portable
- Disk guard quick adjustment
- Spindle lock
- Metal gear head
- Additional handle can be fitted in 3 positions
- Flange nut wrench in the additional handle
- Soft grip
- Low in vibrations
- Cable clip
- Cutting disk not included
- Max. operating pressure 6.3 bar
- Air consumption 114 L/min
- Max. release torque 312 Nm
- Max. thread size 14 mm
- Transport handle
- Pressure switch
- Safety valve
- Intake filter
- Oil level control by viewing glass
- Drain screw for condensed water
- Big wheels for easy transport
- Big pressure gauge and quick-release
- coupling for regulated working pressure
- Pressure reducer
- Big pressure gauge and quick-release
- coupling for unregulated tank pressure
- Non-return valve
- Pump lubricated with oil
- Vibration-reducing base
- 10 years warranty against rusting through of the tank
Mains connection: 230V ~ 50Hz
Motor rating: 90kW
Intake capacity: 19 l/min
Output Power: at 1 bar :11 l/min.
at 2 bar :9 l/min.
at 3 bar :6 l/min.
Operating pressure: Max.4 bar
No. of cylinders: 1
- Small body for easy grip handle and yet powerful
- Quick run down capacity
- Durable ratchet head for long life
- Forward & reverse switch
- Ideal for confined work space
- Small body for easy grip handle and yet powerful
- Quick run down capacity
- Durable ratchet head for long life
- Forward & reverse switch
- Ideal for confined work space
- Compact and powerful
- Rubber covered ratchet head
- Durable ratchet head for long life
- Forward & reverse switch
- Ideal for confined work space
- Compact and powerful
- Rubber covered ratchet head
- Durable ratchet head for long life
- Forward & reverse switch
- Ideal for confined work space
- Pin-less clutch mechanism
- 2-step throttle for precise control
- Elastomer side handle grip
- 360° free rotating exhaust
- 4-position regulator
- Pin-less clutch mechanism
- 2-step throttle for precise control
- Elastomer side handle grip
- 360° free rotating exhaust
- 4-position regulator
- Pin-less clutch mechanism
- 2-step throttle for precise control
- Elastomer side handle grip
- 4-position regulator
- Pin-less clutch mechanism
- 2-step throttle for precise control
- Elastomer side handle grip
- 4-position regulator
- Heavy duty clamps for use on large work pieces where maximum clamping force required
- Slide and head guaranteed unbreakable
- Hard wearing rolled thread helps apply pressure quickly and smoothly
- Sash clamp slides and head are flat bottomed so that the clamp stands without support
- Clamp Capacity: 915mm / Holding 500 kg Pressure
- Aluminum Handle with Steel Clutch Housing
- Compact and Powerful
- With colour coding
- Common key sizes are clearly kept in the Holder
- With Colour-Coded socket Wrench rapid mapping of the Key variables
- Ball head allows the Screw at an Angle of up to 25 °.
• Good quality cam lock, inclusive of 2 keys
• Magnetic catch for added grip
• Colour and number coded key panel system for key management
• Galvanized and colour coded metal key tags for easy organisation
• Wall mounted (wall fixing plugs & screw included)
• Good quality cam lock, inclusive of 2 keys
• Magnetic catch for added grip
• Colour and number coded key panel system for key management
• Galvanized and colour coded metal key tags for easy organisation
• Wall mounted (wall fixing plugs & screw included)