Search result
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
RM183.00
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
RM183.00
- Digital multimeter for AC/DC current and voltage, resistance, capacity, frequency measurements, and for continuity and diode tests.
- Digital multimeter measures AC/DC current, voltage, resistance, capacity, frequency and tests continuity and diodes. Due to its complete functions, high measurement accuracy and convenient operation, the multimeter is an ideal tool for industrial and research applications as well as for radio fans and household.
RM147.00
- Automatically maximizes battery life and performance with a built-in battery health mode
- Hybrid LED battery charging gauge with LCD display
RM199.00
- working surface area: 150mmX80mm
- Whole dimension: 260mmLx100mmWx150mmH
RM260.00
- A cordless drill is an electric drill which uses rechargeable batteries.
- These drills are available with similar features to an AC mains-powered drill.
RM225.00
Lenght(mm) : 457
Lenght(inches) : 18
Max Cutting Load: 65
RM104.30
RM158.00
- Item Hydraulic Service Jack
- Application Heavy-Duty
- Material SteelLifting Capacity -2-1/2 tons
- Lifting Height Min. 85 to 381mm
- Lifting Height Max.3-3/8" - 15"
- Power Raise20-1/4"
- Chassis Length:29-3/8"
- Operation Type:Manual Retracted Length 4"
- Handle Length 49-7/8"
- Caster Wheel Dia.2-1/4"
RM245.00
- Item Hydraulic Service Jack
- Application Heavy-Duty
- Material SteelLifting Capacity -2-1/2 tons
- Lifting Height Min. 85 to 381mm
- Lifting Height Max.3-3/8" - 15"
- Power Raise20-1/4"
- Chassis Length:29-3/8"
- Operation Type:Manual Retracted Length 4"
- Handle Length 49-7/8"
- Caster Wheel Dia.2-1/4"
RM235.00
- Model YT-82291
- Mains voltage [V] 230~
- Mains frequency [Hz] 50
- Nominal power [W] 2000
- Blowing temperature (max) [ºC] 350 (I) / 550 (II)
- Air flow [l/min] 300 (I) / 500 (II)
- Insulation class II
- Net mass [kg] 0,76
- Protection grade IP20
- Warranty 1 year warranty exclude wear & tear
- part
RM198.00
- A range of bolt cutter in most popular sizes
- Cutter blades are of chrome molybdenum tempered steel with cutting jaws tempered HRC 60° °±4 (FBS Standard)
- Special heat treatment gives blades extra hardness and durability
- Easy to Carry
- Meet ANSI standards
RM148.00
RM254.00
- Drop forged CR-V steel jaws & leaded screws (270mm) both heat treated ensure you obtain professional job performance.
- The tool is designed for use in limited space under wheel arch.
- Jaws design is fitting to wrap coil claws for safely.
- Maximum jaw opening is 270mm.
RM126.00
Lenght(mm) : 762
Lenght(inches) : 30
Max Cutting Load: 84
RM222.00
RM275.00
Model | 10503568 |
Clamping Capactiy | 32" (800mm) |
Clamping Depth | 2-1/2" (64mm) |
Weight | 1.551kg |
RM106.00
Lenght(mm) : 914
Lenght(inches) : 36
Max Cutting Load: 104
RM223.00
RM365.00
- Drop forged CR-V steel jaws & leaded screws (370mm) both heat treated ensure you obtain professional job performance.
- The tool is designed for use in limited space under wheel arch.
- Jaws design is fitting to wrap coil claws for safely.
- Maximum jaw opening is 370mm.
RM156.00
- Inner D: 15mm / 5/8"
- Outer D: 20mm
- Length: 50M
RM240.00
- Inner D: 19mm / 3/4"
- Outer D: 25mm
- Length: 50M
RM285.00
- Packed 50pcs/box for price.
- Code : 0123-M-0248
RM128.00
- Solid cast construction
- Accurate positioning in two directions (crossed)
- Heat treated steel jaws
- Secures firmly on drill press table & moves similar to vertical mill
- Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities
RM198.00
- Flux-resistant copper bit ensures long soldering life
- Lightweight comfortable wooden handle
- Voltage 220v
- For home workshop, repairs, hobbies & stained glass applications
RM130.00
- Solid cast construction
- Accurate positioning in two directions (crossed)
- Heat treated steel jaws
- Secures firmly on drill press table & moves similar to vertical mill
- Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities
RM275.00
- Quality steel jaw, steel rail
- Fast-easy adjusting moveable jaw
- T-bar rotating handle
- Use for a firm hold on your metal fabricating or woodworking projects
- For all woodworkers, cabinet makers, or the hobbyist restoring antique furniture
RM210.00
- Quality steel jaw, steel rail
- Fast-easy adjusting moveable jaw
- T-bar rotating handle
- Use for a firm hold on your metal fabricating or woodworking projects
- For all woodworkers, cabinet makers, or the hobbyist restoring antique furniture
RM260.00
|
RM187.00
- Chrome vanadium steel, proper heat treated
- Black phosphate finished
- To separate tire beads .Use it with a tire machine or manually
RM110.00
- 75 degree Offset ring design for optimum operations in recessed areas
- High torque performance offering over 1.6 times the ANSI & DIN Standards
- Set includes:
- 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22mm
RM285.00
CODE | SIZE
(INCH) |
H
(MM) |
L
(MM) |
OPEN SIZE
(MM) |
|
40- PB504 | 4 | 125 | 200 | 100 | |
40- PB506 | 6 | 85 | 250 | 115 | |
40- PB508 | 8 | 95 | 275 | 160 |
RM170.00
GAAT0805 | 3 |
FBAB0108~0315 Phillips Anti-Slip Screwdrivers PH1x80, PH2x100, PH3x150 |
1 | FBBB0203 Stubby Phillips Anti-Slip Screwdriver PH2x25 |
|
3 |
FAAB0410~6E15 Slotted Anti-Slip Screwdrivers 4x100, 5.5x100, 6.5x150 |
|
1 | FABB6E03 Stubby Slotted Anti-Slip Screwdriver 6.5x25 |
RM105.00
RM154.00
91-SH089 SAFETY HARNESS With Double Hooks Lanyard
Features:
Alloy steel carabiner
100% polyester belt
Adjustable tight strap
Double big forged snap hook
Application:
For fall protection on construction site
RM155.00
- With colour coding
- Common key sizes are clearly kept in the Holder
- With Colour-Coded socket Wrench rapid mapping of the Key variables
- Ball head allows the Screw at an Angle of up to 25 °.
RM160.00
RM254.00
- Aluminised Heat Resistance Gloves Panox Palm
- 550°C ~ 850°C
- Lenght : 40cm (16'')
- Reinforce at the palm provides excellent performance to heat resistance
RM215.00
Collapsible Safety Active Square Cone (AM-SC02)
Weight:3kg
- .Easy to store in a convenient and practical way; simply push down to flatten.
- .Easy to carry and transported.
- .Durable construction.
- .Weighted base to resist moving from high winds or passing cars & trucks.
- .Suitable for emergency responders, fire, rescue or simply as an emergency traffic cone kit for motorists.
RM130.00
Features
Strong blowing power
Silver coated mesh
Operation - Maximum 12 hours
3 months warranty on motor* (Terms & Condition Apply)
RM278.00
- Anchor Sling
- Material : 45mm folded webbing
- Strenght > 22kN
- Length : 1m
- Conform to BS EN795 & Sirim certification No : PPO71008
RM150.00
- Anchor Sling
- Material : 45mm webbing
- Strenght > 22kN
- Lenght : 1 meter
- Conform to BS EN795 & Sirim certification No : PPO71008
RM112.50
- Rated power input: 670 W
- No-load speed: 12000 rpm
- Grinding spindle thread: M10
- Disc diameter: 100 mm
- Length: 263 mm
- Width: 77 mm
- Height: 95 mm
- Weight: 1.5 kg (without cables and accessories)
RM120.75
- Input Power: 720w
- Rated Speed: 12000/min
- Disc Size: 100mm
- Disc Bore: 16mm
- Spindle Thread: M10
- Cable: 3.0M
- Machine Weight: 1.5kg
RM223.00
- Large induced draft amount, and it has a long service life.
- · Large air flow, low noise, spare electricity power.
- · Utilizes CAD optimized design for blade, with high efficiency.
- · Suitable for school, hotel, home for ventilation.
RM250.00
- KT-1954 Ball joint puller
- Heat treated drop forged steel body and bolt for long rough usage.
- Spread ball joints easily where space prevents the use of direct action method.
- Jaws open : 19mm.
RM148.00
- This universal tie rod end remover will work on most cars and light trucks.
- The necessary force needed to remove tie rod end is easily applied through the centre pivot action.
- Fork open : 20mm, Reach : 20mm-50mm
- Suitable for : VW-Audi, BMW, Fiat, Ford, Mercedes, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Volvo
RM160.00
- This universal tie rod end remover will work on most cars and light trucks.
- The necessary force needed to remove tie rod end is easily applied through the centre pivot action.
- Fork open : 20mm, Reach : 50mm-80mm
- Suitable for : Opel Rekord, Senator, Monza, VW Transporter
RM228.00
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
RM222.00
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Switch for 6 V and 12 V
- Switch for car and motorcycle
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
RM210.00
- Microprocessor-controlled automatic charger
- Diagnostic system
- LED display (battery status, trickle charging, unit on, charging, and errors)
- Push button for setting charging current
- Charging leads with sturdy terminal clamps
- Power switches
- Electronic overload, voltage reversal and short-circuit protection.
RM264.00
- Sturdy, compact design in metal
- Adjustable spark guard with large safety goggles
- Ball bearing mounted shaft with zero play
- 1 coarse grinding/sanding wheel
- 1 fine grinding/sanding wheel
- Safety hood closed off at the sides
- Adjustable work supports
- Non-slip, vibration-absorbing feet
RM225.00
- Flux-resistant copper bit ensures long soldering life
- Lightweight comfortable wooden handle
- Voltage 220v
- For home workshop, repairs, hobbies & stained glass applications
RM135.00