Free shipping for orders over RM500.00
Welcome www.hand-tools.com.my & www.amatrix.com.my
checkout/checkout = http://www.hand-tools.com.my/cart account/register = http://www.hand-tools.com.my/register product/category = http://www.hand-tools.com.my/category product/search = http://www.hand-tools.com.my/search checkout/cart = http://www.hand-tools.com.my/checkout account/wishlist = http://www.hand-tools.com.my/wishlist product/product = http://www.hand-tools.com.my/product product/special = http://www.hand-tools.com.my/special information/information = http://www.hand-tools.com.my/information common/home = http://www.hand-tools.com.my
Search result
Sort by
Show result
  • The new BV 5/1 Karcher backpack vacuum is a lightweight and powerful backpack vacuum designed for daily use. Ideal for deep cleaning.
  • Karcher have designed this powerful vacuum for cleaning hard to reach areas. Ideal for fast turnaround areas such as public transport, offices, cinemas, theatres and stairwells. Choosing a KARCHER BV 5/1 vacuum can dramatically increase productivity in these cleanliness critical areas.
  • The BV 5/1 Karcher backpack vacuum also features a 5 litre capacity and a single, powerful vacuum motor.
RM1,923.00
  • True RMS AC voltage and current for accurate measurements on non-linear signals
  • Measure up to 1000 VAC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 50 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
  • Use as a conventional multimeter when the display is connected
  • Radio transmitter automatically turns off when the display is connected to the meter
  • Auto power off maximizes battery life
  • Min/Max and Average recording to capture variations automatically
  • Test continuity and diodes
  • Easy to read display with large digits and bright backlight
  • Battery life approximately 400 hours
RM1,905.00

 L535 x W258 x H225mm (BOX) 
• TOTAL 108PCS 
• CONTENTS:B108-1 
                         B108-2 
                         B108-3 
                         B108-4 
                         B108-5

RM1,982.20

• Designed to meet IEC 61010-1 CAT III 600V
• Test leads with remote control switch.
(For insulation&Simplified Earth Test)
• Back light function.
• Color coded scales and range switch position for easy reading.
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
• Can be hung around the neck for both hand’s operation.

RM2,179.00
  • DXT - Deep and Exact Cutting Technology Deep cutting - 3 stage reduction gear unit and movable rear blade guard provide larger capacities of cutting crown molding or skirting board.
  • Capable of diagonal cutting up to 203mm in crown molding.
  • Capable of vertical cutting up to 165mm in baseboard (skirting).
  • Exact cutting is obtained by using 4 short poles instead of the usual 2 longer poles. This also reduces vibration and makes for more precise cutting.
  • 6 linear ball bearings are used to support the 4 poles for smooth and precise sliding out.
  • Double sliding guide fence - the upper and the lower sections slide independently for added convenience; each upper fence slides outwards for bevel cut and each lower fence slides inwards to securely hold small workpieces for precise and exact cutting.
  • Quick and accurate mitre angle lock - mitre angle can be locked or unlocked by simply turning the handle 90°.
  • Positive stops at 0°, 15°, 22.5°, 31.6° and 45°.
RM3,700.00
  • No oil in the compressor. Completely eliminate oil from the compressed air system.
  • Low maintenance and less operational costs.
  • Air receiver made by stainless steel or painted with powder coating for rustproof.
  • Various options for different application.
  • The best solution for Pure, oil-less quality air.
  • Control System 
RM1,900.00
  • Swinging hammer impact mechanism is well-suited to wide range of air pressures.
  • Powerful 6-vane motor delivers superior performance.
  • Chemical-resistant boots absorb shocks and protect the tool from damage.
  • Ergonomic auxiliary handle provides excellent maneuverability.
  • 4-position power regulator and forward/reverse control.
RM2,780.00
  • Delivers 1,770 ft-lb (2,400 Nm) maxiumum torque @ 120 psi
  • Fast-torque™ delivers 1,000 ft-lb (1,356 Nm) in 2 seconds
  • Improved feather touch trigger
RM2,780.00
  • 100kg 
  • Top working surface area: 410mmX140mm
  • Whole dimension: 700mmLx270mmWx310mmH

 

RM1,950.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced Stable Digital Control System
  • Provides various adjustable parameters
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
RM2,700.00

Size :105mm

Shape: C

D2 : 95mm

D1 : 150mm

L2 : 58mm

L : 125mm

Image result for ACTION 60560105

RM1,740.00
RM2,200.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM7,660.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM7,660.00
  • Capacity (HP-KW): 15-11.2
  •      Flow (l / min): 2198
  •      Use voltage (V): 380
  •      Puly first rotation speed compression (v / min): 648
  •      Cylinder head compression: 3
  •      Working pressure (kg/cm2): 8
  •      Maximum pressure (kg/cm2): 10
  •      Tank capacity (L): 304
  •      Dimensions LxWxH mode (mm): 1910x760x1420
  •      Weight (kg): 534
  •      Origin: Taiwan
RM11,200.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM9,300.00
  • Tungsten inert gas (TIG) welding, also known as gas tungsten arc welding(GTAW) is an tungsten inert gas shielded arc welding process using non-consumable tungsten electrode to produce the weld. TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys.
  • Stick Welding and TIG Welding, function 2 in 1
  • By means advanced inverter technology
  • PWM control system provides constant current and precise current control
  • High efficiency, minimum no-load consumption and economical energy usage.
  • Elegant shape of seam with smooth arc striking.
  • Small in size, firm in structure and light for carry, especially suitable for high altitude and mobile operation.
RM1,170.00

• 4 x bearing wheels for durable maneuver
• Large Grass catcher for high capacity grass collection
• Adjustable cutting height
• Easy cleaning and no mess.
• Delivers low noise and good tonal quality
• Float Feed Carburetor. Optimized fuel delivery for improved start-ability and superior performance
• Oiled Foam Air Cleaner. Provides protection against airborne debris entering the engine
• Splash Lubrication. Ensures adequate lubrication throughout the crankcase during normal operating conditions.
• OHV Technology. Optimized performance that delivers longer engine life and improved fuel economy
• Safety clutch system installed – so that once release engine automatically stops to prevent any injuries.
• 2 way fold-able for easy storing.
• Cutting width 18" / 460mm

RM1,033.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Welding current and voltage preset function
RM2,020.00
  • Working Range 0-950mm
  • 20 Tonne Capacity
  • Overall width : 780mm
  • working width : 500mm
  • Total Height : 1,860mm
  • Base width : 600mm
  • Frame width : 90mm
  • Working Range : 1,120mm
  • Stroke : 145mm
  • Pressure : 69MPA
RM1,490.00
RM1,700.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Welding current and voltage preset function
RM2,690.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Welding current and voltage preset function
RM2,530.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • The Inverter EASY ARC 210M1 Series designed in single phase (240volt) heavy duty, portable, more reliable. With Advance features of Lift TIG Start, Constant Arc Control designed for Stick welding of steel and other DC weld able materials.
  • Lift-Arc Ignition(TIG) - Soft arc striking is ensured by lift-Arc Ignition.
  • More protection - The main P.C Board and electronic parts are enclosed and separated in different compartment and always free from Metal dust.
  • Overload protection - Thermostat prevents the machine from overload.
RM1,080.00
  • Tungsten inert gas (TIG) welding, also known as gas tungsten arc welding(GTAW) is an tungsten inert gas shielded arc welding process using non-consumable tungsten electrode to produce the weld. TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys.
  • The inverter EASY ADVANTIG220D.P Series designed for portable, heavy duty and highly reliable applications using Surface Mount Technology (SMT). With advance features of Pulse TIG welding start, constant Arc Control designed for TIG welding of steel and other DC weld - able materials.
RM2,210.00
  • Tungsten inert gas (TIG) welding, also known as gas tungsten arc welding(GTAW) is an tungsten inert gas shielded arc welding process using non-consumable tungsten electrode to produce the weld. TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys.
  • Advanced stable digital control system, provides various adjustable parameters
  • AC TIG, DC TIG, STICK function 3 in 1
  • By means of advanced inverter technology
  • Advanced Stable digital control system, provides various adjustable parameter.
  • High efficiency, minimum no-load consumption and economical energy usage.
  • Elegant shape of seam with smooth arc striking.
  • Small in size, firm in structure and light for carry, especially suitable for high altitude and mobile operation.
RM3,150.00
  • Tungsten inert gas (TIG) welding, also known as gas tungsten arc welding(GTAW) is an tungsten inert gas shielded arc welding process using non-consumable tungsten electrode to produce the weld. TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys.
  • Stick Welding and TIG Welding, function 2 in 1
  • By means advanced inverter technology
  • PWM control system provides constant current and precise current control
  • High efficiency, minimum no-load consumption and economical energy usage.
  • Elegant shape of seam with smooth arc striking.
  • Small in size, firm in structure and light for carry, especially suitable for high altitude and mobile operation.
RM1,600.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology for heavy-duty industrial user
  • Built-in, piston-driven compressor provides long life and superior airflow
  • Strong hot start
  • Post Flow Cooling for long-life tip and nozzle
  • Non-high frequency design for better environment
RM3,070.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM1,700.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
RM4,160.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
RM4,535.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Small in size, film in structure and light for carry, especially Suitable for high altitude and mobile operation.
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM1,660.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Small in size, film in structure and light for carry, expecially Suitable for high altitude and mobile operation.
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM1,600.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Small in size, film in structure and light for carry, especially Suitable for high altitude and mobile operation.
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Strong ability against electricity fluctuation
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM2,220.00
  • Adjustable height work table
  • 12 variable speed
  • Column diameter : Ø92mm
RM1,800.00
  • The highly regarded Ingersoll-Rand IR 261 3/4" Drive Impact Wrench model combines compact size with high output, which makes it perfect for everything from spring work to pinion nut and track pad removal and major engine teardowns.
  • Jumbo hammer mechanism.
  • Up to 1,100 ft.-lbs. of torque.
  • Trouble-free, longer performance aided by the Pressure-Feed Lube System.
  • Compact and only 8.8" long.
  • Handle exhaust.
RM2,090.00
  • Foot-operated hydraulic pedal keeps your hands free
  • Hand lever for easy, controlled hydraulic release
  • Heavy duty oil-resistant nonslip rubber mat
  • Two locking swivel casters
  • Lift and lower heavy cargo for smooth,easy loading and unloading
  • Ideal for transporting machinery and big tool chests
  • Unloading trucks and more
  • Fodd-pedal operates hydraulic tabletop
  • Handle-mounted pressure release,truck ship
RM1,100.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Small in size, film in structure and light for carry, especially Suitable for high altitude and mobile operation.
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM2,450.00
  • Tungsten inert gas (TIG) welding, also known as gas tungsten arc welding(GTAW) is an tungsten inert gas shielded arc welding process using non-consumable tungsten electrode to produce the weld. TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys.
  • Advanced stable digital control system, provides various adjustable parameters
  • AC TIG, DC TIG, STICK function 3 in 1
  • By means of advanced inverter technology
  • Advanced Stable digital control system, provides various adjustable parameter.
  • High efficiency, minimum no-load consumption and economical energy usage.
  • Unique inverter technology realizes the transition rate 30% higher than regular machine.
  • Elegant shape of seam with smooth arc striking.
  • Small in size, firm in structure and light for carry, especially suitable for high altitude and mobile operation.
  • Water cooling available for 315A and above.
RM6,600.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Adjustable crater voltage and current to reach outstanding welding effect
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
RM5,540.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Advanced stable digital control system, provides various adjustable parameters
  • Adopt soft magnetic ferrite materials for main transformer
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • New protection system to prevent over current, over heat and missing phase
  • Adjustable slow feeding function to ensure arc ignition
  • Adjustable crater voltage and current to reach outstanding welding effect
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
  • Strong ability against fluctuation
RM5,540.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM4,250.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refrantory steel rod.
RM3,430.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM2,290.00

Flammable Storage Cabinets,

Capacity: 45 gal

Dimension: 65 x 43 x 18 (in.)

Doors: 2 manual

No. of shelves/Trays: 2

RM4,386.80
  • Foot-operated hydraulic pedal keeps your hands free
  • Hand lever for easy, controlled hydraulic release
  • Heavy duty oil-resistant nonslip rubber mat
  • Two locking swivel casters
  • Lift and lower heavy cargo for smooth,easy loading and unloading
  • Ideal for transporting machinery and big tool chests
  • Unloading trucks and more
  • Fodd-pedal operates hydraulic tabletop
  • Handle-mounted pressure release,truck ship
RM1,200.00

Capacity : 5000kg

Min Height : 155mm

Max Height : 560mm

Weight : 90kg

RM1,584.00
RM2,200.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • Adjustable slow feeding function to ensure arc ignition
  • Adjustable crater voltage and current to reach outstanding welding effect
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
RM7,250.00
  • The manual metal arc (MMA) welding, also known as shield metal arc welding (SMAW) or stick welding, is a manual welding process that uses a consumable electrode coated in flux to lay the weld. Due to the simplicity of its equipment and operation, currently it is one of the most popular welding processes and is used extensively in the construction of steel structures and metal fabrication
  • With advanced PWM control technology
  • Accurate current preset function guarantees actual current
  • Multi-protections highly reliable
  • Friendly control panel. Applicable for acidic rod, alkalescent rod, fibrin rod and refractory steel rod.
RM3,950.00
  • Load Capacity

500 kg

  • Wheel Diameter

200mm

  • Platform Material

Blue Metal

  • Platform Size

1240x790 mm

  • Loading Surface

1200x750 mm

  • Wire Net Height

505 mm

  • Castor Type

Standard

  • Castor Height

245 mm

  • Floor Height

288 mm

  • Overall Weight

58 kg

RM2,367.00
  • Suitable for various type of steel applications.
  • On-site hole drilling in steel plates.
  • Bridge construction and shipbuilding.
  • "I" steels, shaped bars, framework and other machinery.
  • Steel reinforcements and construction material.
RM4,890.00

 5402 Circular Saw 16"(415mm), 1750W, 2200rpm

  • The biggest portable ever.
  • Yet, surprisingly light at 14kg for easy operation.
  • Cuts 157mm at 90 degrees and 106mm at 45 degrees
RM2,050.00
  • .Industrial two stage belt drive air compressor
  • .Special high pressure design, safety, sturdy structure for durability
  • .Suitable for use in factories, auto maintenance plant, tire stores and special high pressure  supply system
  • .Minimum space require and easy to use
RM6,110.00
  • Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
  • Advanced inverter technology
  • Strong hot start
  • Smart Dimension and light for carry
  • Air filter and regulator integrated
  • LED Digits indicators
RM4,760.00
  • Gas metal arc welding (GMAW), also known as metal inert gas (MIG) or metal active gas (MAG) welding, is an arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. Today, GMAW is commonly used in industrial welding processes due to its shorter welding time compared to other welding processes.
  • Advanced stable digital control system, provides various adjustable parameters
  • Adopt soft magnetic ferrite materials for main transformer
  • Adopt PWM and PFM control technology, quick to react and stable to weld
  • Infinite voltage control
  • New protection system to prevent over current, over heat and missing phase
  • Adjustable slow feeding function to ensure arc ignition
  • Adjustable crater voltage and current to reach outstanding welding effect
  • Welding current and voltage preset function
  • Adjustable arc force for less spatter and smoke
  • Strong ability against fluctuation
RM8,770.00
  • Alloy steel forged parts provide maximum durability.
  • Forged latch retainer for quick chisel change.
  • Optional muffler available on request.
RM4,841.00
  • Light weight & high power.
  • Automatic push throttle valve.
  • Few parts for easy maintenance.
  • Durable forged body.
  • With chisel bush for long time.
RM1,128.00
  • Alloy steel forged parts provide maximum durability.
  • Forged latch retainer for quick chisel change.
  • Optional muffler available on request.
RM5,546.00
  • Alloy steel forged parts provide maximum durability.
  • Forged latch retainer for quick chisel change.
  • Optional muffler available on request.
RM4,841.00
  • Heat-treated forged body for excellent durability.
  • Noise reduction muffler is optionally available.
  • D-style handle for precise control and safe use.
  • Latch retainer for quick change.
RM4,126.00
  • Alloy steel forged parts provide maximum durability.
  • Forged latch retainer for quick chisel change.
  • Optional muffler available on request.
RM4,045.00
  • Heat-treated forged body for excellent durability.
  • Noise reduction muffler is optionally available.
  • D-style handle for precise control and safe use.
  • Latch retainer for quick change.
RM3,235.00