- Model: EPT-2748
- Capacity: 3,000 kg
- Min. fork height: 75 mm
- Max. fork height: 185 mm
- Fork length: 1220 mm
- Overall fork width: 685 mm
- Fork width: 160 mm
- Load wheel diameter: 80 x 70 mm (Polyurethane)
- Steering wheel diameter: 180 x 50 mm (Polyurethane)
- Used in many industries, such as automotive repair, heavy equipment maintenance, and product assembly,
- major construction projects, and any other instance where a high torque output is needed.
- .3 ton (6,000 lbs) load capacity
- .200 degree turning radius allows room to maneuver in tight quarters
- .Articulating 7 in. poly-over-aluminum steer wheels ensure continual contact with uneven floors
- .One-piece cast pump features high quality seals, hardened and chrome plated ram and piston, top-of-stroke and overload safety bypass valves
- .Smooth, special lowering valve for controlled descent
- .Single point valve replacement for quick and easy rebuild
- .Rounded fork tips with nylon guide rollers for trouble-free pallet entry and exit
- .Solid steel push rods never need adjustment
- .Wheel bearings are double sealed and lifetime lubricated
- .Ideal for warehouse, supermarkets, distribution centers, factories, stockrooms, storage facilities and loading docks
- .Engineered to provide years of trouble-free service even under toughest working conditions
• No pick up when generator is killed.
• Prevent form Audio lock up or Computer down when changing the car battery.
• Power supplier for home electric appliances.
• Emergency power supply.
• Easy and quick charge.
• Size:320 x 85 x 240mm
• Weight:9kgs
- Super compact size with length 115.5mm.
- Super light weight of 1.55kg.
- Torque adjustable
a) Forward: 3 speeds
b) Reverse: 1 speed - Torque output: 500ft-lb
- Handle exhaust : Built-in muffler.
Features
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
Technical Information
- Single-phase, portable battery chargers for charging lead accumulators
- With toggle switch for normal and fast charge (boost), quick start
- Equipped with protection against overloading and reverse polarity
- With ampere meter for charging and starting current
- Multiple charge current settings
- Mains voltage 230 V
Applications
- For charging 12V & 24Vbatteries
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
Model X5ET0.5EE
**Features**
.Design for removal, installation and transportation of transmission and transfer cases on passenger cars, vans and light trucks that are raised by an in ground lift
.Supplied with chain for safe loading
.Precision valve allows delicate adjustment when taking out gearbox and realigning during replacement
.Four castors for extra manoeuvrability in confined spaces
.Low frame design gets under the lowest clearance trucks, making it ideal for clutches repair work
**Specifications**
Model X5ET0.5EE
Lifting weight 0.5 ton
Min. height 170 mm
Max. height 680 mm
Net weight 45 kg
Packing 86 x 44 x 22 cm
Warranty 6 months
Model | TY12003 |
---|---|
Lifting Weight (ton) | 12 |
Stroke (mm) | 175 |
Max Working Distance (mm) | 0-610 |
Net Weight (kg) | 43 |
Packing size (mm) | 1260 X 220 X 165 |
Set contains:
8,9,10,11,12,13,14,15,16,17,18,19mm
Plus a 1/4", 3/8" & 1/2" Socket adapter
Metal storage case
- High Quality Japanese Components
- 740mm x 480mm Deck with 850mm Heigh Folding Handle
- Platform Height: 140mm
- Fitted with 2 Fixed and 2 Swivel 100mm Diameter Castors
- High Push Handle
- High Quality Precision Bearing Castors Provide Smooth Rolling Action
- Non-slip Matting and Plastic Bumper Around Deck
- Maximum Load Capacity: 150Kg
- Weight: 12.5kg
- Rated Input Voltage (V) : AC240V
- Power Frequency : 50/60
- Phase : 1
- Rated Input Current (A) : 22
- Rated Input Power (KVA) : 4.9
- No-load Voltage (V) : 65
- Welding Current (A) : 10 - 160
- Welding Voltage (V) : 20.4 ~ 26.4
- Rated Duty Cycle (%) : 60%
- Insulation Grade : F
- Cover Protection Level : IP21S
- Type of Cooling : Air Cooling
- Packaging Size (mm) : 320 x 120 x 200
- Weight (kg) : 4.3 KG
- Polished ram plunger and cylinder protecting seals from abrasion
- Built-in safety valve ensuring operation safety against overloading
- Patented hydraulic bypass system preventing ram plunger from over-travelling
- * Tank capacity : 20 Gallon
- * 50 GPH Pump
- * Removable work shelf and parts basket
- * Durable steel cabinet with powder coal finish
- * Power supply : 240/50Hz ( Solvent Pump )
- * Net weight : 25kg
- * Solvent Capacity : 12 Gallon.
- * Max pump output through spigot:Recirculate 2.7-3.3liter/min of
- solvent
- * Package size : 78 × 55 × 31 cm
- Net Weight (kg)25
- Gross Weight (kg)28
- Package Size (mm)790 x 550 x 320
- Brand : X5
- Model:TRPW20GAL
- Gross Weight / Net Weight (kg): 28 / 25
- Package Size (mm) : 790 x 550 x 320
- 12-gallon working capacity & 50 GPH pump output
- Removable work shelf and parts basket & accepts many commonly used cleaning agents
- For use with petroleum or water based solvent & suitable for different kind of solvent at same time
- Self draining. Convenient removable work shelf. Parts basket for soaking small parts in solvent
- Fusible link greatly reduces risk of fire hazards
- 110 volt solvent pump. Complete Unit is UL approved. Magnetic pump
- Specifications: Tank Capacity: 20 gallon. Solvent Capacity: 12 gallon, Pump Output thru Spigot: 50gph
- Adjustable leverage adapts pump to lubricant and operating conditions.
- Designed for both high volume transfer and dispensing a variety of low viscosity fluids
- Equipped with air connector and quick detach coupler
- Power :2800w
- Voltage :220v/240v
- Cooling System : Recycle
- Vacuum : 2000mmH20
- Capacity :80L
- Height: 109cm
- Diameter: 44cm
- Function : wet/dry
- Voltage:220V/240V
- Frequency : 50/60Hz
- Length of Cable : 7.2m
- 5" PAD SIZE - 5mm / 6" PAD SIZE - 5mm
- Rear Exhaust with muffler
- Brand new design 3-in-1 Vacuum Modes - Non-vacuum, Central Vacuum, Self vacuum modes
- High & Low speed control allows users to easily adjust speed for different applications
- Mechanically lower body with low center designed to make operating steady with working face
- Alternatively capable for equipping with dust bag or industrial vacuum cleaner
- Ideal for grinding construction steel, metals and wood
- Orbital diameter
- 2.5 mm - Fine finish eccentric sander with dust extraction
- 5 mm - General sanding eccentric sander with dust extraction
- Cuts up to 230mm wide and 80mm deep
- Robust machine 300mm square table tilts up to 45°
- Quiet Input 350W induction motor
- Automatic 12V work light
- Balanced bandsaw wheels with long-life PU coating
- Precision mitre gauge with aluminum profile tilts 60° left and right
- The JWBS-9 bandsaw has some impressive cutting capacities for a bench top machine, up to 230mm wide and 80mm deep. Overall this is a robust machine with a 300 x 300mm table that can be tilted up to 45°. Powered by a quiet Input 350W induction motor, it is fitted with an automatic 12V work light for a better view of work in progress. The wheels are balanced and have a long-life PU coating, to prolong blade life. The saw is supplied with a precision mitre fence with an aluminum profile for better work support and a range of cutting angles from 60° left to 60° right. The bandsaw takes 1,510mm (59.1/2") long blades 3mm/10mm in width. Supplied with rip fence, mitre fence, work light and 6mm blade.
Inner D: 32mm / 1-1/4"
Outer D: 32mm
Length: 50M
Inner D: 50mm / 2"
Outer D: 60mm
Length: 40M
- Voltage 220V 50Hz
- Power 550W (0.75HP)
- Current 2.6A
- Rated pressure 0.7Mpa (7Bar)
- Speed 1400r/min
- Tank capacity 60Liter
- Air capacity 75L/min (2.6CFM)
- Noise 69dB(A)
- Insulation Class B
- Weight 35kg
- Dimension 650 x 305 x 637mm
- Voltage 220V 50Hz
- Power 550W (0.75HP)
- Current 2.6A
- Rated pressure 0.7Mpa (7Bar)
- Speed 1400r/min
- Tank capacity 30Liter
- Air capacity 75L/min (2.6CFM)
- Noise 69dB(A)
- Insulation Class B
- Weight 21kg
- Dimension 585 x 280 x 245mm
- Voltage: 220V 50Hz
- Power 550W/ 0.75HP
- Current: 2.6A
- Rated pressure: 0.7Mpa/ 7Bar
- Speed: 1400r/min
- Tank capacity: 60Liter
- Air capacity: 75L/min/ 2.6CFM
- Noise: 69dB (A)
- Insulation: class B
- Weight: 35kg
- Dimension: 650 x 305 x 637mm(LxWxH)
.Replaceable hardened steel jaws.
.Fused steel handle bends before vise can be over stressed.
.Machined steel main screw with rolled two-start acme thread for wear-resistance and smooth operation.
.Fully-machined on all load-bearing surfaces.
.Internal SG nut takes load, secures and aligns main screw. Can be replaced when worn, saving
cost of replacement of whole vise body.
.Safety stop prevents slide from accidentally separating from body.
.Lip on back body guides filings and fragments away from the slide.
- Motor power 850W
- 3-Speed selector High /Medium /Low
- Beautiful, appearance with the advantages of lightness and high flexibility
- Safety cover for motor can prevent sucking any sundries
- Super fan-turbo-motor can produce strong airflow to improve the work efficiency
- Polythene outer shell can protect the inner components and make the machine safe and durable
- High grade material and three-speed selector ,which can make you regulate the airflow optionally
- Strong airflow and little noise make it suitable for hotels, large workshops, warehouses, marketplaces and other wet places
- Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts.
- Includes three sets of pins to suit lock nuts with pin holes.
- Aearo Reusable Earplugs
- Corded Each pair comes with a cord & is supplied with a polybag
- NRR : 25db
- Comply JKKP EP 35
- (100prs / Box)
Mains connection: 230V ~ 50Hz
Motor rating: 90kW
Intake capacity: 19 l/min
Output Power: at 1 bar :11 l/min.
at 2 bar :9 l/min.
at 3 bar :6 l/min.
Operating pressure: Max.4 bar
No. of cylinders: 1
- Portable with 2 wheels.
- Air regulator with dual gauges.
- Automatic pressure switch.
- Thermal protection switch.
- Air safety release valve.
- Only 66mm (2-5/8") in head height.
- DA3010F : Features a built-in LED job light.
- With keyed chuck.
12inch Portable Axial Blower (13.8kg)
Size: 12"
V: 220-240
Phase single
Hz50/60
W520
r/min: 2800/3300
m3/min:65
dB(A)71
(Pa)373
c/w 5 Meter Dust Hose (Weight: 4.7kg)
- Electronic speed control
- Easy and quick sanding belt change
- Exact belt position with precision adjustment
- Adjustable additional handle for optimum work
- Chip extractor adapter and dust collection box
- Hinged front cover
- Soft grip
- Cable clip
- 1 sanding belt
- 9 speed settings from 280 – 2,350 min-1
- V-belt drive, speed setting with stepped belt pulley
- Drilling spindle with ball bearings
- Scroll chuck
- Folding chip guard
- Swiveling scale ring for precise drilling depths
- Drill table can be tilted and swiveled
- Infinitely variable adjustment of table height
- Stable foot with slots for vise fastening
- ON/OFF switch with zero-voltage release
- Stable, precise working machine with multi-stage belt drive spindle with ground plate
- Casting table
- Safety switch with zero voltage switch prevents the self-restart if a power failure
- Infinitely adjustable table
- Table tilted sideways and swivel out
- Fold-chip protection
- Adjustable drill depth stop
- Keyed chuck.