- Toe-Cap & Midsole
- Availbale in Yellow & Black colour
- Size : 5 to 13
- Made to comply EN ISO 20345 specification for safety & durability under all condition
- Resistant to fats, acids, oils,solvent & many other chemical
- Our soldering paste is composed of metal powder activated flux and blending agents. The area and thickness to be soldered can be easily controlled. No spot appears in non-soldered area. The paste has a good diffusion and non-corrosion.
- VITO Earmuff
- Available in Yellow / Red / Blue cup
- SNR : 27db
- Comply to EN352-1 & JKKP EM 146/04
- Emergency Gravity Eyewash
- without solution
- For immediate emergency flushing of eye injuries, this eyewash bottle provides fast, effective relief
- Ear Loop Surgical Face Mask 3 Ply
- Made of soft non-glass high filtration efficiency material
- Form-fit design which helps to breath easily
- SFM-3P-EL - Ear loop
- SFM-3P-T - Tie-on
- Helmet Sunshade Brim
- Material : Polyester & cotton
- COTTON COVERALL
- Available Colour : Navy Blue,Orange,Red, Light Blue, Yellow & Grey
- Made of 100% cotton for coolness & comfort.
- Pre-shrunk material that protect against high percentage of shrinkage.
- Full front 2 way zipper closure, elastic waistband, two lower pockets with flaps & buttons
- Can be worn over cloths.
- UNI-T's UT07A-UK socket tester is suitable for detecting socket wiring for all British sockets.
- UNI-T UT202A Auto-ranging AC 600 Amp Clamp Meter
- clamp multimeter UNI-T UT202A
- Safety Rating
- CAT II 600V
- CAT III 300V
- AC Current 20A/200A/600A ±(1.5%+5)
- AC Voltage 2V/20V/200V/600V ±(1.2%+5)
- DC Voltage 200mV/2V/20V/200V/600V ±(0.8%+1)
- Resistance 200Ohm/2KOhm/20KOhm/200KOhm/2MOhm/20MOhm ±(0.8%+3)
- Display Count 1999
- Manual Range
- Jaw Capacity 28mm
- Continuity Buzzer
- Low Battery Indication
- Data Hold
- MAX Mode
- MIN Mode
- Input Impedance for DCV Around 10MOhm
- General Characteristic
- Power 9V Battery(6F22)
- LCD Size 35.6mm X 18 mm
- Product Color Red and Grey
- Product Net Weight 220g
- Product Size 210mm X 75.6mm X30 mm
- Standard Accessories Battery, Test Lead,Carrying Bag, Gift Box, English Manual
- Certified to IEC 60900 VDE, DIN 1000V and GS safety standard.
- Ergonomic handles.
- Precise laser technology for more accurate and repeatable measurements
- Large, easy-to-read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- 10:1 distance to spot ratio
- IP40 rated for extra protection against airborne contaminants
- Displays the minimum, maximum or average temperature, or the difference between two measurements
- Hi and Lo alarms for rapid display of measurements outside the limits
- Powered by one (1) AA battery
- One year warranty
- Aearo Reusable Earplugs
- Corded Each pair comes with a cord & is supplied with a case
- NRR : 25db
- Comply JKKP EP 35
- (50prs / Box)
- Prescription Safety Eyewear
- Anti Scratch
- Anti UV
- Impact resistant
- 1 pc - 18 liter Pail
- 2 pcs - Oil-only Sorbent Sock BOS-SOC7612 ( 1 pc-able to absorb > 8.25 liters)
- 2 pcs - Oil-only Sorbent Pillow BOS-PIL2025 ( 1 pc-able to absorb > 2.5 liters)
- 5 pcs - Oil-only Sorbent Pads BOS-LMT2002 ( 1 pc-able to absorb > 0.725 liters)
- 2 pcs - Hazardous material disposable bag 24" x 30"
- 2 pcs - Cable Tie
- 1 prs - Anti Fog Goggle
- 1 prs - Nitrile Glove
- PTC heating system insures outstanding temperature control
- Mechanical feed ensures a continuous glue stream up to 25g adhesive per minute
- Highly efficient melt chamber give a fast heat-up time of only 2-5 minutes
- Full-hand lever trigger and ergonomic grip designs provides optimum comfort
- Bracket stand for safety and easy place while working on any project
Kyoritsu 1021R Digital Multimeter
• Elegant and easy-to-use cabinet
• Large display with 6000 counts and Backlight
• Enhanced current measuring function using an external clamp sensor
• Two detachable holders, flat and wing type
• Accurate reading with True RMS
• Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
- Toecap : Composite
- Midsole : Anti perforation SJ Flex
- Lining : Cambrella
- SIZES :36-47
- CATEGORY :Sports S3 SRC
- CERTIFICATE :CE S3
- Choose the Safety Jogger X2020 Safety Shoes from our range of Safety Jogger Safety Boots, Safety Shoes & Safety Trainers. All of our Safety Boots have been designed to provide protection and comfort while meeting all required safety standards to European norm ENISO 20345:2011
- Looking for safe and strong boots for the big works? Then safety boots by Safety Jogger fit your needs! Our boots are the combination of safety and comfort you are looking for.
- Safety Jogger X2020 Unisex Work Shoe EN345 in Business, Office & Industrial, Industrial Supply/MRO, Protective & Safety Gear
- Telcom crimping tool for Western connectors (RJ10, RJ11/12, RJ 45) with ratchet mechanism. Material: S45C steel.
- Pro'sKit CP-376TR is a crimping tool for Western type connectors (RJ10, RJ11/12, RJ 45).
- For crimping 4, 6, 8-contact Western type connectors of RJ10, RJ11/12 standard (width 9.65 mm) and RJ 45 standard (width 11.68 mm).
- Allows cutting and stripping flat telephone and round cables.
- Increased crimping force due to a ratchet mechanism.
- VDE safety screwdriver set with SNCM alloy steel AISI: 8660 tips.
- 7 elements in a set.
- This essential kit is a must when working with electrical items.
- Supplied in a case.
- Ideal desoldering tool for circuit board repairing
- Piston with double oil seals: no air leakage guarantee
- Handle with soft foam provides comfortable operation, non-slip.
- Compact and lightweight, anti-corrosive plastic housing
- Spring loaded piston with one button release
- Anti-rust lasting spring and easy replaceable tip
- Quick and easy solder residue clearance
- The desoldering pump offers quick and easy solder residue clearance. 36 cm-Hg suction capability.
- Pro'sKit DP-336D desoldering pump offers quick and easy solder residue clearance.
- Piston with double oil seals
- No air leakage
- Anti-rust lasting spring
- Easy replaceable tip
- Special cushion structure decreases 40% of the back attack force
- Perfect for grinding castings and welds
- All metal housing construction for industrial applications
- Powerful 750W motor
- Full brim helmet unvented safety helmet with comfortable 6 point head harness.
- Have been tested as an “approved combination” under AS/NZS 1801:1997 and MS 183 : 2001.
- Colour Available : Blue, Red, White, Yellow
- Available Harness : Webbing
- Locking System : Ratchet Only
Pro'sKit 1PK-810B Computer Service Tool Kit (220V)
- case size: 325x195x48 (mm) 19 elements in set
- Pro'sKit 1PK-810B is a computer service tool kit.
- 19 elements in set.
- The tools are fixed on the internal walls of the bag.
- Weight: 1.6 kg.
- Rotary tool with a set of accessories (40 pcs.) perfect for cutting, sanding, polishing, drilling, burr removal and more.
- Pro'sKit PT-5501I is a rotary tool with a set of accessories perfect for cutting, sanding, polishing, drilling, burr removal and more.
- Powerful tool with variable speed from 10,000 to 32,000 rpm.
- Shaft with flexible cable provides more comfort during use and allows precision work.
- Spindle lock for easy change of different accessories.
- 40-piece multipurpose accessories and carrying case included.
- Economical way to monitor ambient temperature and humidity
- Large LCD display, easy to read
- Integrating Temperature, Humidity, clock, Alarm clock & Calendar Multi-functions
- Measuring temperatures range from -10°C (-14°F) to +55°C(+130°F)
- MAX. and MIN. temperature and humidity memory function
- °C / °F switch.
- 12-hour/24-hour displaying system selection.
- Wall hanging or desk-top stand support
- Low power consumption
Replacement tip: Please follow up 8PK-S120N Series tips
· Converts easily from pen to gun configuration.
· When not in use handle covers tip for storage protection.
• Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.
• 3400 counts with bargraph display.
• Pocket size and heavy duty design.
- Analog multimeter with overload protection for AC/DC voltage, Null DC voltage, DC current, resistance, capacitance measuring, and battery/continuity/transistor check.
- Pro'sKit MT-2017 is a analog multimeter with overload protection for measuring AC/DC voltage, Null DC voltage, DC current, resistance, capacitance and battery/continuity/transistor check.
- Economical way to monitor ambient temperature and humidity as well as outdoor temperature via remote temperature probe.
- LCD display for easy to read.
- AX. and MIN. temperature and humidity memory automatic update functions.
- Wall hanging or desk-top stand support.
- · Lens material: glass
- · Diopter: 3 diopter/12 diopter
- · Light source: AC120V 60Hz / AC220-240V 50Hz T4 12W circular fluorescent lamp supplied with electronic ballast
- · Product size: Base: 18x15cm, Height: 37cm
- Heavy Duty
- Twin Hammer
- Handle exhaust
Working Pressure 90 psi
Certificate: CE, GS
|Square drive||: 1/2″|
|Capacity bolt size||: 5/8” (M16) 16mm|
|Free speed||: 7500 rpm|
|Max. torque||: 518 ft-lb (700 N-m)|
|Air inlet||: 1/4” PT|
|Air hose||: 3/8” I.D.|
|Air consumption||: 4 cfm|
|Net weight||: 5.72 lbs (2.70 Kgs)|
- Ideal for drilling, polishing, engraving, routing, shaping, sanding and milling.
- Mini Grinder Pro'sKit PT-5201B is ideal for drilling, polishing, engraving, routing, shaping, sanding and milling.
- Low vibration, high torque and lightweight ergonomic design
- Comfortable operation due to elaborated body shape
- The quick-change chuck for removable heads
- Microprocessor controlled 140 W desoldering station with temperature range from 160 to 480 °C.
- Pro'sKit SS-331B is a microprocessor controlled 140 W desoldering station with temperature range from 160 to 480 °C.
- Built-in high power 600 mmHg air pump.
- Suitable for lead-free desoldering of single and multi layer PCB.
- Accurate temperature control from 160 to 480°C.
- Long lifetime heater ceramic heater.
- Ergonomic design.
- Magnification 2.5х.
- Moving-contact assembly of clips and a lens.
- Model number : 608-391A (Acrylic).
- Weight: 486 g.
- This zippered tool bag features 2 sturdy pallets with plenty of straps to hold your assorted tools in place.
- Digital multimeter for measuring AC/DC voltage, AC/DC current, resistance, as well as diode and continuity tests with auto ranging and non-contact AC voltage detector.
- Pro'sKit MT-1508 is a multimeter for measuring AC/DC voltage, AC/DC current, resistance, as well as diode and continuity tests with auto ranging and non-contact AC voltage detector.
- Compact and lightweight: most convenient tool in its class for fatigue-free working
- Variable 2-speed design covers wide range of drilling, fastening applications
- Powershare 12V battery is interchangeable with other WORX 12V tools
- LED light increase visibility-great for dark or enclosed area
- Warranty: 12 Months
- Material : PP Non Woven with PE coating
- Chemical resistant to protech chemical splash
- Free size
- Packaging : 1pc / polybag
- working surface area: 150mmX80mm
- Whole dimension: 260mmLx100mmWx150mmH
(M / FT) x (MM)
100 / 330
- · 5 diopter (2.25X magnification) glass lens.
- · Even, shadow-free light under the magnifying lens with 22-watt T5 circular fluorescent tube
- will make it easier for you to see and enjoy the activities longer.
- · All metal housing mounted on a spring balanced arm that stays set in any position.
- · Clamps easily and securely onto most flat surfaces up to 65mm thick.
- · Dust-proof cover for lens protection.
- Heavy Duty Rainsuit
- All snap on button are non conductive, non corrosive & rustproof
- Auto ignition for starting and operating easily and safely under any condition.
- Safety ignition switch complies with CPSC standard to prevent children misuse.
- With TR90 high transparent nylon gas tank features long service life and more safety.
- Butane is easy to refill and check with see-through fuel window.
- Comes with a ceramic heater, which prolongs service life.
- Adjustable flame control for precision use.
- Complete kit in a plastic box meets various multi-functional operating purposes.
- Plastic case may be used as a support stand.
|Sole||Dual Density PU|
- Disposable Coverall
- Protection against dust, liquid, oil grease, blood, saline diluted & etc
- soft & ligthweight fabric
- Pro'sKit 1PK-813B basic electronic tool kit.
- 22 elements in set.
- The tools are fixed on the internal walls of the bag.
- Weight: 2.2 kg.
- Sole : PU/PU
- Toecap : Composite Cap
- Midsole : Puncture resistant SJ FLEX
- Lining : Coolmax
- Insole : Latex
- Upper : Condura & Nylon
- High quality steel
- Wire cutter with crimping function
- Non slip handle
- Steel Toe Cap
- Steel Mid Sole
- Slip Resistant Sole
- Genuine Leather
- Side Lock Stitch Attach Upper
- Case size: 325x195x48 (mm) 20 elements in set
- Pro'sKit 1PK-302NB is a compact tool kit for personal computers.
- Case size: 325x195x48 (mm).
- 20 elements in set.
- The tools are fixed on the internal walls of the bag.
- The contents list is available at "Detail".
- Soldering Voltage: 220~240V.
- Weight: 1.4 kg.
- Standard Plug: B.
- Solid cast construction
- Accurate positioning in two directions (crossed)
- Heat treated steel jaws
- Secures firmly on drill press table & moves similar to vertical mill
- Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities
- Microprocessor controlled and anti-static implementation.
- The automatic cooling increases the uptime of the station and its components.
- Digital indicated temperature of the hot air gun and soldering iron.
- Compatible with series T soldering iron tips from AOYUE and other HAKKO-compatible tips.
- Compatible with Replacement Air Nozzles from AOYUE
- Compact digital soldering station with precise Celsius or Fahrenheit temperature adjustment. Temperature range from 200 to 480°C (392 to 896°F).
- Pro'sKit SS-206B is a compact digital soldering station with precise temperature adjustment for repairing the cell phones and other small electronics.
- Adjustable precise temperature control.
- Celsius or Fahrenheit temperature setting.
- Temperature range from 200 to 480°C (392 to 896°F).
- 110 V / 220 V switch.
- Insulated and ergonomic soldering iron handle.
- Compatible with a wide range of soldering iron tips.
- Capacitance and temperature measurement function.
- Digital multimeter Proskit MT-1280 with capacitance and temperature measurement function.
• High sensitivity DC20kΩ/V.
• 1m drop-proof heavy duty designed taut-band movement.
• Can measure line voltage up to AC 600V.
(Voltage to ground MAX AC300V)
(Protected by 600V ceramic fuse against accidental overload)
• Continuity buzzer, battery check, LED check, temperature
• Skeleton type robust and clear case
with carrying handle furnished as standard accessory.
- .Contains 80 items most commonly used hand tools Useful for maintenance of the production hall for minor work in mechanical workshop or garage.
- .The box is made of galvanized sheet
- .Socket made of durable tool steel CrV 50BV30
- .Ratchet has 72 teeth made of stainless CrV 6140
- .Bits are made of stainless steel AISI S2
- Complies with the newest CE safety standard
- 3 1/2 digits 1999 counts.
- High measuring accuracy: ±0.5%.
- Measurements are possible even under a strong magnetic field.
- LCD display for low power consumption and clear readout even in bright ambient light conditions.
- Zero knob: Knob to zero when testing low capacitance.
- Extra function: LCD backlight, low battery indication
- Anti-static shoe
- Heel energy absorption
- Anti-slipping sole
- Anti perforation steel
- Oil and fuel resistant sole
- Composite toe cap
- Breathable leather uppers
- Metal Free
- Interchangeable bars maximize versatility
- Reduces the number of tools user needs to carry
- Tip Type Multi-Bit
- 1/8" Standard Bar
- 3/16" Standard Bar
- 1/4" Standard Bar
- 0pt Phillips® Bar
- 1pt Phillips® Bar
- 2pt Phillips® Bar
- 1 Tack Puller
- 1 Brad Awl
- 1 Hook Driver
- Storage case included